Select your vehicle
-13%

Bilstein B8 6112 Suspension Leveling Kit – 47-234413

Bilstein

Shop Toyota Tacoma Leveling Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2.75-inch front coilover leveling kit for 2016–2023 Toyota Tacoma
  • Front lift only, with no track bar drop or bump stops
  • Part number 47-234413

Description

Overview

The Bilstein 47-234413 is a B8 6112 front leveling kit for the 2016–2023 Toyota Tacoma in the Limited, SR, SR5, TRD Off-Road, TRD Sport and Trail trims. It raises the front 2.75 inches using coilover shocks, and the rear is not lifted.

The kit uses two 60mm shock absorbers, matched cold wound coil springs and billet aluminum spring seats. The shocks use a digressive piston that improves damping control on and off the road. The kit is designed to add ground clearance, room for larger tires and more wheel travel. The spring seat position sets the front height, and no bump stops or track bar drop are included. Because the front is raised relative to the rear, have the alignment checked after installation. Keep the front from sitting lower than the rear, since that can cause suspension wear and underside damage. Lifting the front also makes room for bigger tires and can improve handling.

Key features

  • 2.75 inches of front lift
  • Coilover shock design
  • Two 60mm shock absorbers
  • Matched cold wound coil springs
  • No bump stops included

Before you buy

Coilover-based leveling changes how the front suspension works, so it helps to understand the parts before you buy. The shock and spring work together to control body motion, and a front lift alters the angle of the control arms and the load on the joints. Shock damping matters more once the truck sits at a new height, because the shock is working at a different point in its travel. Drivers who add larger tires should also expect more load on the steering and driveline components.

When a front lift is paired with bigger tires, related parts often need attention. Brake lines, sway bar links and CV angles can all be affected by a change in height, and some owners later add a track bar or upper control arm to correct geometry. Inspect shock mounts, bushings and the coil seats at each oil change or tire rotation. Look for leaking shock bodies, worn bushings or uneven tire wear, which can point to alignment issues after the lift.

  • Check alignment after the first few highway drives
  • Inspect shock mounts and bushings regularly
  • Re-torque fasteners after the first trail runs

Specifications

Brand Bilstein
Part number BIL47-234413
Series B8 6112
Front lift 2.75 inches
Rear lift Not applicable, front lift only
Front lift method Coilover shocks
Track bar drop Not included
Bump stops None
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 2016–2023 Toyota Tacoma in the trims named above.

The list does not cover the Tacoma from 2015 or from 2023 onward. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the front rises 2.75 inches and no track bar drop is included, have the alignment checked after installation.

What’s included

Two 60mm shock absorbers, two coil springs and two billet aluminum spring seats.

Fitment

VehicleYearsTrims
Toyota Tacoma2016–2023Limited, SR, SR5, TRD Off-Road, TRD Sport, Trail

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 47-234413 fit a 2019 Toyota Tacoma TRD Off-Road?

Yes. It fits the 2016–2023 Tacoma TRD Off-Road, which covers 2019. The TRD Sport and Trail trims also fit those model years, while the 2015 and 2023 model years fall outside the fitment range.

Does it lift the rear?

No. It is a front lift only, so the rear of the Tacoma stays at its factory height. The front is raised 2.75 inches while the rear is not lifted.

Are bump stops included?

No. The kit contains two 60mm shock absorbers, two coil springs and two billet aluminum spring seats, with no bump stops. Confirm the contents against your installation before starting.

How often should the shocks be inspected?

Inspect them with the rest of the front end at each tire rotation. Look for oil seeping down the shock body, clunking over bumps or a bouncy ride, which can mean the shock needs service or replacement.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Leveling Kits on Amazon