Select your vehicle

Bilstein 6112 Series Leveling Kit – 46-241627

Bilstein

Shop Toyota Tacoma Leveling Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front leveling kit for 2005–2015 Toyota Tacoma Base, Pre Runner and TRD Pro
  • Two 60mm Bilstein B8 6112 shock absorbers with coil springs and spring seats
  • Front lift of 0 to 2.75 inches, depending on application
  • Part number 46-241627

Description

Overview

The Bilstein 46-241627 is a B8 6112 series front leveling kit for the 2005–2015 Toyota Tacoma in the Base, Pre Runner and TRD Pro trims. It replaces the front shocks and springs with a matched set, and the front can be lifted from 0 to 2.75 inches depending on the application.

The kit gives more ground clearance, room for larger tires and more wheel travel. Multiple snap-ring grooves in the shock body let the spring seat sit at different positions, so the front height can be set.

Key features

  • Two 60mm shock absorbers
  • Two custom matched cold wound coil springs
  • Two billet aluminum spring seats
  • Snap-ring grooves for different spring seat positions
  • 60mm digressive piston provides damping control on and off road.

Spring seat setup and alignment

The spring seat position is the main way the front height is set on this type of leveling kit. Moving the seat to a different groove changes the preload on the coil spring, so both sides should be set to the same groove and checked against each other. Measuring from a fixed point at each front corner helps keep the truck level.

Front leveling changes the steering geometry, so the alignment should be checked after the height is set. Tires that were already worn on the old height can wear faster on the new one, and it is worth inspecting the tread at the first rotation. A quick look at brake lines and the steering stops after the change can prevent rubbing or binding.

  • Set both sides to the same spring seat groove
  • Measure each front corner on level ground
  • Check the alignment after leveling
  • Inspect brake lines after the height change

Specifications

Brand Bilstein
Part number 46-241627
Series B8 6112
Front lift 0 to 2.75 inches, depending on application
Shock diameter 60mm
Position Front
Fitment type Direct fit

Vehicle fitment

It fits the 2005–2015 Toyota Tacoma, including the Base, Pre Runner and TRD Pro trims.

The list does not cover the Tacoma from 2004 or 2016 onward, or the Tacoma’s other trims. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Set the spring seat position to reach the lift you need, then check the alignment after installation.

What’s included

Two shocks, two coil springs and two spring seats.

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2015Base, Pre Runner, TRD Pro

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

How much front lift does the 46-241627 give?

0 to 2.75 inches, depending on the spring seat position and the application. The snap-ring grooves on the shock body let the spring seat sit at different heights.

Does it fit a 2012 Toyota Tacoma TRD Pro?

Yes. It fits the 2005–2015 Tacoma TRD Pro, which covers 2012. The Base and Pre Runner trims are covered for the same years.

What is a snap-ring groove for?

It sets the spring seat position, which controls the front height. Moving the seat between grooves changes how much the front is raised.

Does a front leveling kit change the rear height?

No. This kit replaces only the front shocks and springs, so the rear keeps its factory setup. If the truck sits uneven, compare the rear height separately before adjusting the front.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Leveling Kits on Amazon