Overview
The Trail Master 2.25 Inch Leveling Lift Kit, part number TM592, adds 2.25 inches of front lift to the Toyota Tacoma through strut spacers. It suits 4WD and PreRunner models in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims for 2005–2018.
Bump stops are included, which is not the case with the TM490 and TM491 kits. The spacers are steel, and the kit has no track bar drop.
Strut spacers add height at the front by sitting between the strut and mount, so the factory strut and coil keep their function. The 2.25 inch lift is a front-only change, with bump stops included. The steel spacers are finished in black. Check the truck’s level at both ends after fitting, and confirm that the tire size you plan to run clears the front arches at the new height.
4WD and PreRunner Tacomas should check the track bar and driveline angles after the lift, since those angles change with the new height. Measure the geometry before and after fitting, and recheck the alignment once the kit is installed.
Key features
- 2.25 inch front lift
- Front strut spacers
- Bump stops included
- Steel spacers in black
Driveline and alignment after a lift
Raising the front changes the angle of the front driveline, which connects the transfer case to the front differential on 4WD trucks. A larger angle can cause vibration at speed, and a steep angle wears the joints faster. Measure the angles before and after fitting to see how much the lift has changed them.
On a PreRunner, check the rear driveline and the rear suspension in the same way, since the rear is not raised and the front is. Look for worn joints, grease leaks or clicking when turning. Keep the alignment check and the tire clearance check together, because both change with the new front height.
- Measure driveline angles before and after fitting
- Check the track bar and its mounting points
- Recheck alignment once the lift is complete
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM592 |
| Front lift height | 2.25 inch |
| Front lift method | Strut spacers |
| Spacer material | Steel |
| Finish | Black |
| Bump stops | Included |
| Track bar drop | Not included |
| Shock relocation bracket | Not applicable |
Vehicle fitment
It fits the 2005–2018 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
Tacoma years outside 2005–2018 and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the included bump stops with the new height. Confirm the drive type before fitting, since the kit suits 4WD and PreRunner models.












