Overview
The ICON Vehicle Dynamics Ram HD 2″ Front Coil Spring Spacer Kit (part number IVD2121) is a front spacer kit with a 2-inch lift for the 2013–2021 Dodge Ram 2500 and 3500 HD pickups.
ICON Vehicle Dynamics makes aftermarket suspension parts for trucks, SUVs and off-road use. Its spacer kits are built for heavy-duty Ram models.
Key features
- 2-inch front lift
- Front-only spacer kit
- Direct fit for the 2013–2021 Ram HD trucks
Front spacers and alignment
A 2-inch front spacer raises the coil springs at the top, which shifts the front suspension geometry. Upper control arm angles, steering geometry and the front driveline all change a little with the new height. An alignment after installation is what brings those angles back into a normal range for tire wear and steering feel.
Heavy-duty Ram trucks are often used for towing and hauling, so the front suspension carries more load than on a light-duty truck. Shocks, ball joints and tie rod ends should be inspected before the spacers go in. Replacing worn parts at the same time avoids doing the front end twice.
Tire choice should follow the new height. Check the fender and steering clearance at full lock, and watch the front tires for uneven wear in the first few weeks. If the truck pulls or the steering feels loose, recheck the alignment and the spacer seats before driving far.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | IVD2121 |
| Position | Front |
| Front lift | 2 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2013–2021 Ram 2500 and Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST and Tradesman models.
The 1994–2012 Ram HD trucks are covered by the IVD2120 kit instead, and the 2022 and newer models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 2-inch front lift on a heavy-duty Ram changes the front geometry, so have the front alignment checked after the spacers are installed.
What’s included
The kit is a front-only spacer set with a 2-inch lift. Compare the parts received against your installation steps before starting.


