Overview
The Bilstein 47-259768 is a B8 6112 front leveling kit for the 2010–2024 Toyota 4Runner in the SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, Trail and Venture trims. It provides 0 to 2.75 inches of front lift, depending on the application, and it lifts the front only.
The kit contains two 60mm shock absorbers, two cold wound coil springs and two billet aluminum spring seats. The spring seats sit in snap-ring grooves on the shock body, so the height can be set during the install. The 60mm digressive piston improves damping control on and off the road. The zinc-plated finish is heat resistant and adds durability. A 4Runner whose front sits lower than the rear can wear the suspension over time, and raising the front addresses that while allowing bigger tires. The two shocks, coil springs and billet spring seats make up the complete front set.
Key features
- Front lift of 0 to 2.75 inches
- Two 60mm shock absorbers with a digressive piston
- Cold wound coil springs
- Billet aluminum spring seats
- Zinc-plated finish, which Bilstein describes as heat resistant
Front height and suspension wear
Raising the front of a 4Runner is mostly about keeping the truck balanced. When the front sits lower than the rear, the geometry and load on the front components shift, and the front tires and bushings can wear faster. A leveling kit corrects the stance, so the truck carries its load more evenly and the front suspension is not working at an angle it was not built for.
Off-road use adds more stress. Trail obstacles load the shocks and spring seats in ways pavement does not, so inspect the shock mounts, spring seat grooves and fasteners after rough trips. Check the front alignment after any height change, and look for worn bushings or uneven tire wear at the same time.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL47-259768 |
| Series | B8 6112 |
| Front lift | 0 to 2.75 inches, depending on application |
| Position | Front |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2010–2024 Toyota 4Runner, including SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, Trail and Venture trims.
The list does not cover the 4Runner from 2009 or 2023 onward, or the FJ Cruiser. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the spring seat position for the lift you need, and check the alignment after installation.
What’s included
Two 60mm shock absorbers, two coil springs and two billet aluminum spring seats.








