Overview
The Bilstein 25-194012 is a 5160 Series front reservoir shock absorber for pickups and SUVs with a 3.5 – 4.5 in. lift. Bilstein designed it to install in the factory shock mounting location with no cutting or welding, and its remote reservoir holds extra shock oil for heat dissipation and damping sensitivity.
The shock uses a mono tube body with a digressive valving system and a floating dividing piston located in the reservoir. This design increases wheel travel and shaft movement, and it is built for performance both off-road and on-road.
Key features
- Remote reservoir that increases shock oil capacity for heat dissipation and damping sensitivity
- Digressive valving system that Bilstein says produces full damping capability immediately
- Floating dividing piston located in the reservoir for increased wheel travel and shaft movement
- Reservoir mounting configuration designed for each vehicle application
- Mono tube design in a 46mm ID smooth body, non-coilover
- The zinc plated finish from Triple-C Technology is easy to maintain.
- Gas charged
Reservoir placement and clearance
A remote reservoir needs its own space, so decide where it will sit before removing the old shock. Keep it away from the tire, the exhaust and any moving steering or suspension parts. Route the hose so it does not rub or pinch through full compression and rebound. A reservoir that touches a tire or frame can wear through its body over time, so a clear path is worth planning from the start.
Mono tube designs with a floating piston rely on steady damping, so the rest of the suspension should be sound. Check bushings, mounts and the upper mount hardware for play before installing a new unit. Worn parts can cause harsh damping or uneven wear on the new shock. Replace worn components while the suspension is apart to keep the ride consistent.
- Check the reservoir hose for kinks after installation
- Inspect the body for oil seepage after the first drives
- Retorque mounting hardware after the initial trail use
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-194012 |
| UPC | 651860667126 |
| Shock series | 5160 Series |
| Position | Front |
| Fitment | Direct Fit |
| Lift height | 3.5 – 4.5 in. lift |
| Hydraulic / gas charged | Gas charged |
| Collapsed length | 15.37 in. |
| Extended length | 26.39 in. |
| Travel length | 11.02 in. |
| Lower mount | Bar mount |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Reservoir | Yes |
| Finish | Zinc plated |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Boot included | No |
| Mounting parts included | Upper mount and reservoir mount |
Vehicle fitment
It is a direct fit for the factory shock location on pickups and SUVs, with a 3.5 – 4.5 in. lift.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The upper mount and reservoir mounting kit are included, and Bilstein provides detailed instructions. The reservoir mount is configured for each vehicle application, so use the mount that matches your vehicle. Keep the reservoir clear of the tire and moving suspension parts when routing it.
What’s included
Upper mount and reservoir mounting kit, plus detailed instructions.
Not included: The boot is not included.









