Overview
The Bilstein B8 5160 Series remote reservoir shock absorber, part 25-261400, is a rear shock for the 2015-2018 Ford F-150. Bilstein designs it as a direct fit for lifted trucks and SUVs, with a remote reservoir in place of a traditional integrated one.
The remote reservoir gives the shock more cooling capacity and more wheel travel than a traditional shock. The monotube body keeps damping consistent and fade-free, and the velocity sensitive digressive valve settings are tuned for each application.
Key features
- Remote reservoir for increased cooling capacity
- Monotube design for consistent, fade-free performance
- Velocity sensitive digressive valve settings tuned for each application
- 360 degree swivel banjo hose fitting
- Direct fit for lifted trucks and SUVs
- Zinc plated finish
- Optional reservoir clamp, part 11-176015, available
Reservoir routing and clearance
A remote reservoir is a separate part of the shock, so the install begins with choosing where it will sit. The reservoir should have room to breathe and should stay clear of exhaust heat, the tire path and moving suspension parts. Route the hose with gentle bends so it does not kink when the rear axle moves through its full travel.
Because the reservoir is mounted apart from the shock body, its bracket and clamp deserve the same attention as the shock. Tighten the fasteners firmly and check them after the first few drives on rough road. Worn bushings or a bent bracket can shift the reservoir into the tire, so inspect the mount at each oil change or inspection interval.
- Keep the hose clear of exhaust heat
- Check the reservoir mount after rough trail use
- Inspect the swivel fitting for seepage
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-261400 |
| UPC | 651860786827 |
| Shock series | 5160 Series (B8) |
| Position | Rear |
| Reservoir | Remote |
| Collapsed length | 17.52 in. |
| Extended length | 29.44 in. |
| Finish | Zinc plated |
| Fitment | Direct fit |
| Lift height | 0 to 2 in. lift |
| Optional reservoir clamp | 11-176015 |
Vehicle fitment
It covers the 2015-2018 Ford F-150 in King Ranch, Lariat, Limited, Platinum, XL and XLT trims. The lift range is 0 to 2 in.
Years outside 2015-2018 and other Ford models are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the remote reservoir is a separate unit, plan where it mounts and route its hose clear of moving parts and exhaust heat before tightening. The optional reservoir clamp, part 11-176015, is available if your installation needs a dedicated mount for the reservoir. Check that the hose has room through full suspension travel.
What’s included
This is one rear shock absorber with a remote reservoir and swivel banjo fitting.
Not included: the optional reservoir clamp, part 11-176015.









