Overview
The Bilstein 4600 Series 24-186032 is a rear gas-charged monotube shock absorber for 1999–2004 Ford F-350 Super Duty trucks in Lariat, XL and XLT trims. It is a direct-fit replacement with 0 in lift/drop, suited to owners keeping their current suspension height. It has a 2 in body and a yellow finish.
Heat from the damping oil passes through the shock body to its outer surface, where it dissipates. A dividing piston lets the oil expand as it warms, which helps prevent foaming and loss of viscosity so full damping holds as temperatures climb. The tube is made by a special extrusion process that keeps wall thickness consistent.
Key features
- Monotube gas charged design that moves heat from the oil to the shock body
- Dividing piston lets oil expand as temperatures rise, limiting aeration and viscosity loss
- Tube made by a special extrusion method for tight peak-to-valley tolerance
- Piston head allows separate tuning of compression and rebound damping
- Fewer parts than conventional twin tube designs.
- Dust boots included
Keeping a gas shock healthy
Rear shocks absorb the energy from bumps and keep the tires planted under acceleration and braking. A gas-charged monotube design handles heat well, but it still needs regular checks. Look for oil on the body, a clunk when the suspension cycles, or a ride that feels softer on one side than the other. Any of these means the shock is losing its ability to control the spring.
Keep dust boots intact, since grit on the shaft wears the seal and lets fluid escape. When cleaning the truck, avoid spraying high-pressure water straight at the boot seals. Confirm the rear mounts are tight after the first few drives, because loose hardware can cause noise that gets mistaken for a shock problem.
- Check for oil seepage around the body
- Inspect dust boots for splits
- Retighten mounting bolts after the first drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186032 |
| UPC | 651860493213 |
| Series | 4600 Series |
| Position | Rear |
| Type | Monotube, gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Lift/drop | 0 in |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct Fit |
Vehicle fitment
Bilstein’s manufacturer fitment list covers the 1999–2004 Ford F-350 Super Duty in Lariat, XL and XLT trims.
The list does not cover other Super Duty generations, other Ford truck models, or F-250 and F-450 applications. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks are pressurized, so keep the body away from heat sources and do not cut, drill or puncture the tube. Check that the position is rear before you begin removal.
What’s included
A rear shock absorber with dust boots. Check the package contents against your original shock before starting removal, since mounting hardware may be needed.









