Overview
The Bilstein B6 4600 Shock Absorber, part number 24-253147, is a front gas-charged monotube shock for the 2015-2018 Chevrolet Colorado and 2015-2018 GMC Canyon.
The monotube design delivers consistent, fade-free performance, and the velocity sensitive, digressive piston responds to changing road conditions. It is a direct fit upgrade for OE shocks on stock height light trucks and SUVs. It is offered for 4WD models.
Key features
- Front shock with a yellow finish
- Monotube design for consistent, fade-free performance
- Unique velocity sensitive, digressive piston
- Tuned for each specific application.
- Gas charged, for 0 in. lift or drop
- Direct fit upgrade to OE shocks on stock height trucks
Choosing a shock for your truck
A front shock controls body motion as the suspension compresses and rebounds, so it affects steering feel, braking dive and how the truck settles after bumps. Gas charging helps the damping stay steady when the shock heats up during repeated hard use. A monotube body keeps the oil and gas in a single cylinder, which gives it a more consistent response than many twin-tube designs.
When replacing front shocks, it is common to check the upper and lower mounts, bushings and bump stops at the same time, since worn parts can make a new shock feel less controlled. Shocks are often replaced in pairs on the same axle so both sides respond alike. Watch for oil seepage down the body, clunks over bumps, or uneven tire wear as signs the old unit is worn.
- Look for oil seepage on the shock body
- Inspect mounting hardware and bushings
- Replace in pairs for balanced handling
- Confirm clearance through full steering travel
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-253147 |
| UPC | 651860782577 |
| Product type | Shock absorber |
| Series | 4600 Series (B6) |
| Position | Front |
| Design | Monotube |
| Gas / hydraulic | Gas charged |
| Lift height | w/0 in. lift/drop |
| Finish | Yellow |
| Drivetrain (short description) | 4WD |
| Fitment type | Direct fit |
Check the shock’s dimensions against your mounting points before installing if size or weight matters for your build.
Vehicle fitment
The manufacturer fitment list for the Bilstein 24-253147 shock covers:
- 2015–2018 Chevrolet Colorado (LT, WT, Z71)
- 2015–2018 GMC Canyon (Base, Denali, SLE, SLT)
Match the part number 24-253147 to your vehicle’s year, model, trim, engine and drivetrain before ordering so you receive the correct shock.
This shock covers 2015-2018 models only, so match your truck’s year and trim before you order.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to the correct value for its size and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
- Read all instructions before starting, and support the vehicle on jack stands rated for its weight rather than on a jack alone.
- Wear eye protection and gloves, and replace any worn, damaged or corroded fasteners.
What’s included
One front shock absorber. Check the package contents against your installation before starting.












