Overview
The Bilstein 5160 Series 25-275131 is a rear left remote reservoir shock absorber for the 1998–2007 Toyota Land Cruiser. The reservoir is a separate chamber, and it gives increased cooling capacity and wheel travel compared with a traditional shock.
The shock has a 46mm body and a monotube design for consistent fade-free performance. Its valve settings are velocity sensitive and digressive, and Bilstein tunes them for each application. Each unit has a 360 degree swivel banjo hose fitting for a low profile installation.
This unit is for the rear left corner, so it is sold as one side of a rear pair. Check the position marking against the left side of your truck before fitting it. Route the reservoir hose clear of the frame and moving parts, and compare the mounting points with the damper you remove.
Key features
- Rear left position
- Monotube reservoir design
- 46mm body diameter
- Velocity sensitive digressive valve settings
- 360 degree swivel banjo hose fitting
Rear pair and corner matching
Rear shocks work best when the left and right units damp the same way. If one side is replaced and the other is worn, the truck can pull or feel uneven over bumps. Matching the position marking to the correct side of the vehicle is the first step, and the reservoir should be routed the same way on both sides so the installation behaves consistently.
When inspecting the old shock, check the body for oil, the mounts for play and the reservoir for dents or cracks. A reservoir that has been struck on rocks may leak or lose its gas charge. Mount the shock with the suspension at its normal ride height, and check the hose clearance before tightening the reservoir mount to its final position.
- Verify the rear left marking before fitting
- Compare upper and lower mounts with the old shock
- Look for dents on the reservoir body
- Check hose clearance before final tightening
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-275131 |
| Shock series | 5160 Series |
| Position | Rear left |
| Shock type | Monotube reservoir |
| Body diameter | 46mm |
| Hose fitting | 360 degree swivel banjo |
| Gas charge | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1998 through 2007 Toyota Land Cruiser.
Land Cruiser models outside 1998 to 2007, and other Toyota models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear left remote reservoir shock absorber.
Installation notes
Confirm the rear left position and route the reservoir hose clear of moving parts before tightening the mounts.












