Overview
The Bilstein 4600 Series AK2283 is a rear shock absorber for 1997–1999 Ford F-250 pickups and 2000–2003 and 2004 Heritage Ford F-150 trucks. It is a monotube, gas-charged shock with a 2 in body diameter, sold as a direct-fit replacement for the factory rear damper.
A monotube shock runs one pressure tube instead of the two tubes found in a conventional twin-tube design. A divider piston separates the damping oil from a pressurized gas charge. When the oil heats during long drives or rough roads, the piston lets it expand without aerating, so the damping holds steady as temperatures climb. The seamless tube carries heat from the oil out through the shock body.
The rear shock controls how the axle and the bed settle after each bump, and a worn unit lets the rear bounce on washboard and expansion joints. Replacing the pair of rear dampers on an older Ford pickup is a common way to tighten up that motion, and the AK2283 is built to fit the factory mounting points for the listed years.
Key features
- Monotube body with a single pressure tube and a divider piston
- Gas-charged design that keeps the damping oil from foaming as it heats
- Digressive piston design that reacts to changing road conditions and supports long shock life
- Seamless extruded tube with tight wall-thickness tolerances
- Compression and rebound damping can be tuned separately in the piston head
- Yellow finish with a 2 in body diameter and no external reservoir
Choosing rear shocks for older pickups
Rear shocks on older full-size pickups do more than soften bumps. They control how the axle moves after it leaves a dip, and they keep the bed from pitching on rough grades. When the damping fades, the rear tends to hop over washboard and expansion joints, and the truck can feel loose when loaded. Checking the shocks is a good step before adding heavier tires or a load carrier, since those changes put more work on the dampers.
A monotube unit like this one is usually a reasonable match for a truck that sees highway miles and occasional trail use. Twin-tube shocks are simpler and still common, but they tend to lose firmness sooner when they run hot. If a suspension lift is planned later, match the rear shocks to the new ride height, because a shock with the wrong length can bind or run out of travel.
- Inspect rear shock bodies for oil seepage
- Check mounting bushings for cracks or play
- Replace shocks in pairs for even damping
- Re-torque mount bolts after the first few drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | AK2283 |
| Shock series | 4600 Series |
| Position | Rear |
| Shock type | Monotube, gas-charged |
| Body diameter | 2 in |
| Reservoir | No |
| Finish | Yellow |
| Boot | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–1999 Ford F-250 pickups and Ford F-150 pickups from 2000 through 2003, plus the 2004 F-150 Heritage.
Other Ford pickups are not on this list, and neither are F-150 models from 2005 onward. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber with its boot.









