Overview
The Bilstein 5160 Series 25-197754 is a front remote reservoir shock absorber for Dodge and Ram 2500 and 3500 trucks from 1994 through 2013. It is a stock-mount design, direct-fit to each specific vehicle application, so the installation does not call for the fabrication usually associated with a high performance reservoir shock.
The monotube shock uses a 46mm digressive piston and self-adjusting deflective disc valving. The reservoir connects to the shock body by a hose and provides increased cooling capacity and shock travel, and the unit is gas charged.
Compare the mounting points with the front shock you are replacing before ordering. Confirm your truck’s year and model fall within the supported years.
Key features
- Front position stock-mount design
- Direct fit to each specific vehicle application
- 46mm monotube with a digressive piston
- Self-adjusting deflective disc valving
- Remote reservoir for cooling and travel
Front suspension and steering feel
A front shock affects steering feel, braking dive and how the truck handles rough pavement. When one front shock weakens, the truck can pull or feel light on one side. Front shocks work on the steering axle, so loose or worn mounts show up as wander at highway speed.
Front reservoir shocks are often installed alongside fresh bushings and a steering damper check. Inspect the upper mount, the lower mount and any bump stop while the old shock is out. Keep the reservoir hose clear of the steering components so it does not rub at full lock.
- Replace front shocks in pairs for even damping
- Check both sides for matching bushing wear
- Confirm full steering lock clears the hose
- Look for fluid leaks at the upper mount
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-197754 |
| Shock series | 5160 Series (stock mount) |
| Position | Front |
| Shock type | Reservoir, monotube |
| Piston | 46mm digressive |
| Valving | Self-adjusting deflective disc |
| Gas charge | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
This front reservoir shock fits the 1994 through 2010 Dodge Ram 2500 and Ram 3500, and the 2011 through 2013 Ram 2500 and 2011 through 2012 Ram 3500.
Ram 1500 models, and Ram 2500 and 3500 trucks outside the years given, are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front remote reservoir shock absorber.
Installation notes
Because the reservoir is built for each application, confirm the truck’s year and model against the list before ordering, then check hose clearance after the unit is mounted.









