Overview
The Bilstein 5100 Series Ride Height Adjustable Shock Absorber (part number 24-196499) is a front shock designed for coilover style pickup suspensions. It is a gas charged monotube shock with a 46mm body.
Moving the spring seat to a different snap-ring groove sets front lift anywhere from 0 to 2.5 inches, depending on the application. The 46mm digressive piston with self-adjusting deflective disc valving is designed to increase wheel travel and support handling.
The zinc plated steel body has a Triple-C-Technology coating.
Key features
- Front position for coilover style pickup suspensions
- 46mm digressive piston
- Self-adjusting deflective disc valving
- Snap-ring grooves for 0 to 2.5 inches of lift, depending on application
- Zinc plated steel body with Triple-C-Technology coating
Setting lift and alignment
Ride height on a coilover style pickup depends on where the spring seat sits in the shock body. Moving the seat to a different groove changes front height, which affects steering geometry, bump stop contact and how the springs load. Make one adjustment at a time, measure both sides and keep the setting consistent left and right so the truck does not pull or sit uneven.
Gas charged shocks respond to heat and repeated hard use, so check the body for seepage after the first few drives and whenever the truck has been run hard. A shock that feels soft, bounces after bumps or leaks oil should be inspected before the next trip, especially after the lift setting has changed.
- Set both sides to the same groove
- Re-check bump stop clearance after changing height
- Look for leaks after the first few drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-196499 |
| UPC | 651860669076 |
| Position | Front |
| Shock type | Gas charged, 46mm monotube, coilover style |
| Collapsed length | 17.58 inches |
| Extended length | 22.48 inches |
| Travel length | 4.90 inches |
| Shaft diameter | 14mm |
| Body | 46mm inside diameter, snap-ring grooved |
| Lift range | 0 to 2.5 inches |
| Finish | Zinc plated |
| Reservoir | No |
Vehicle fitment
It is built for front coilover style pickup suspensions. Confirm fit for your vehicle’s year, model and trim before ordering, and check the shock’s collapsed and extended lengths against your suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the spring seat in the snap-ring groove that matches the lift you want. Front lift changes alignment, so have the alignment checked afterward.
What’s included
One Bilstein 5100 Series front shock absorber, part number 24-196499.
Not included: The boot.









