Select your vehicle

Bilstein 4600 Series Shock Absorber – 24-064255

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Bilstein 4600 Series monotube shock, rear, part number BIL24-064255
  • Gas charged monotube with 2 inch body diameter and boots included
  • Fits 2000–2004 Mitsubishi Montero Sport ES, LS, Limited and XLS models
  • No external reservoir; yellow finish

Description

Overview

The Bilstein 4600 Series rear shock, part number BIL24-064255, is a gas charged monotube shock with a 2 inch body diameter, boots included and a yellow finish. It is a direct fit for the 2000 to 2004 Mitsubishi Montero Sport in ES, LS, Limited and XLS trim.

The shock is a monotube with no external reservoir. The gas charged design moves heat from the oil to the outer surface of the shock body, where it is released more efficiently, which helps the shock hold its performance over time.

Inside the tube, a dividing piston lets the oil expand as it warms, which stops foaming and thinning so the full damping stays available as temperature climbs. The piston head allows compression and rebound to be tuned independently for a balance of ride comfort and control.

The tube is made by a special extrusion process that gives a tight peak-to-valley tolerance and an even wall thickness. The seamless tube has fewer parts than many twin tube or road sensing designs, which adds to its durability.

Key features

  • Rear position
  • Gas charged monotube design
  • 2 inch body diameter
  • Boots included
  • No external reservoir
  • Yellow finish
  • Dividing piston that keeps oil volume stable as temperatures rise
  • Separate compression and rebound tuning in the piston head

Rear damping and the rod seal

The rear shock on a compact SUV handles bumps, rebound and body motion over everyday roads. The monotube gas charged design moves heat through the body, which supports steady damping as the shock warms. A gradual loss of control, rattling over small bumps or oil on the outer tube are typical signs of wear.

Rear shocks are normally replaced as a pair. Because the rod seal is exposed when the shock is working, a fitted boot keeps grit and water away from it. Check the boot for tears, and make sure it is seated before tightening the upper and lower fasteners. Replacing shocks together keeps the rear ride balanced.

  • Inspect the boot during every service
  • Look for oil on the outer tube
  • Check rear springs and mounts when fitting

Specifications

Brand Bilstein
Part number BIL24-064255
Shock series 4600 Series
Position Rear
Shock type Monotube, gas charged
Body diameter 2 inch
Reservoir None
Boots Included
Finish Yellow
Fitment Direct fit

Vehicle fitment

It fits 2000 to 2004 Mitsubishi Montero Sport models in the ES, LS, Limited and XLS trims.

The list does not include the Montero from 1989 to 1991 or 2001 to 2006, or other Mitsubishi models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the rear shock’s length and mounts against the rear springs before installing. Make sure the boot is seated properly so dirt cannot reach the rod seal.

What’s included

The product is one rear monotube shock with boots, under part number BIL24-064255.

Fitment

VehicleYearsTrims
Mitsubishi Montero Sport2000–2004ES, LS, Limited, XLS

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the BIL24-064255 fit a 2002 Mitsubishi Montero Sport?

Yes. The list covers 2000 to 2004 Mitsubishi Montero Sport models in ES, LS, Limited and XLS trim, so a 2002 model in one of those trims is listed. Confirm the trim before ordering.

Does the BIL24-064255 have an external reservoir?

No. It is a monotube design with no external reservoir, so the oil and gas are contained inside a single tube body.

Is this shock sold with boots?

Yes. The product is listed with boots included, which help keep dirt away from the rod seal once the shock is fitted.

How do I keep dirt off the rear shock rod seal?

Keep the boot fitted, seated and undamaged. A torn boot lets grit reach the rod seal, which can cause leaks and wear over time. Inspect the boot during routine checks, especially after driving on gravel or dirt roads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon