Overview
The Belltech 6560 is a rear hanger kit, part number BEL6560, for leaf spring equipped trucks and SUVs. The name refers to a 1 to 2 inch rear adjustment, and the hangers lower the rear of a leaf spring equipped vehicle by 2 to 4 inches, depending on the application.
The hangers reposition the front or rear leaf spring mounting points, the spring eyes. This lets the rear come down without modifying or changing the factory leaf springs, so the original ride quality and factory load capacity are kept.
The kit fits 1999 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models, along with 2001 to 2003 and 2005 to 2006 HD models and 2007 Classic models in the same families. Check your exact model and year against this range before ordering.
Key features
- Repositioned front or rear leaf spring mounting points
- Keeps the factory leaf springs in place
- Lowers the rear by 2 to 4 inches, depending on application
- Designed to keep factory ride quality and load capacity
- Direct fit
Leaf spring basics
A leaf spring stack carries load and locates the axle, and the spring eyes at each end are where the spring attaches to the frame. Moving those mounting points changes the spring’s angle and the rear ride height. Because the springs stay the same, the original spring rate is kept when the hangers are used.
Lowering the rear also changes shock angle, bump stop clearance and driveline angles, so those parts should be checked after installation. U-bolts and spring bolts should be retightened after the first few drives, since new mounting positions can settle. Look for cracked leaves or worn bushings in the spring eyes during inspection.
Rear ride height affects how the truck handles loads and rough roads, so a noticeably lower rear may change how it carries cargo. Check tire clearance at full compression and avoid rubbing on the wheel well or brake lines.
- Retighten U-bolts after first drives
- Check shock length and clearance
- Inspect spring eyes and bushings
- Check driveline angles after installation
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL6560 |
| Product name | 1 to 2 inch lift hanger kit |
| 2 to 4 inches, depending on application | 2 to 4 inches, application dependent |
| Position | Rear leaf spring |
| Spring type | Leaf spring |
| Fitment | Direct fit |
Vehicle fitment
The kit fits 1999 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500, including HD models from 2001 to 2003 and 2005 to 2006, and 2007 Classic models in both families.
The list does not include the 2019 and later Silverado and Sierra 1500, the 2500 or 3500 models, or any Chevrolet or GMC model outside these families. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hangers change where the leaf spring attaches, check shock and brake line lengths and driveline angles after installation. Confirm the drop your vehicle needs, since it depends on the application.
What’s included
The kit is the rear hanger set under part number BEL6560. Check the hardware against your installation before starting.











