Overview
The Belltech 6 inch rear drop flip kit, part number BEL6528, relocates the rear axle of a leaf spring truck from beneath the leaf spring to above it. The result is a large rear drop, and each kit is engineered for its application.
Each rear flip kit is made from high quality steel with a powder coated finish and Grade 8 hardware. C-notches come with most rear flip kits, so check whether this kit includes them before installing.
It fits the 2019–2021 Chevrolet Silverado 1500 and 2019–2021 GMC Sierra 1500, covering Custom, LT, High Country, Denali, AT4 and SLT trims.
Key features
- 6 inch rear drop from the axle flip
- Application specific engineering
- High quality steel construction
- Durable powder coated finish
- Grade 8 hardware
- C-notches come with most rear flip kits; confirm for this set.
Living with a flip kit
A flip kit lowers the body by moving the axle to the top of the leaf spring, so the spring is now below the axle and carries load differently. The drop is large, so the rear suspension has less room to compress, and bump stops and shock travel become more important. Expect a firmer ride when the truck is empty, and check the suspension for contact at full compression.
Flip kits change the pinion angle and push the brake lines and parking brake cable out of their original positions, so these lines should be inspected for stretch. The leaf springs also need a periodic check for cracks and the U-bolts for correct torque, since the axle now sits in a new position. Keep the old hardware until the new kit is fitted and inspected.
- Check pinion angle after installation
- Inspect brake lines and parking brake cable
- Re-torque U-bolts after the first drive
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL6528 |
| Drop | 6 inch rear drop |
| Kit type | Rear flip kit |
| Material | High quality steel, powder coated |
| Hardware | Grade 8 |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2019–2021 Chevrolet Silverado 1500 and the 2019–2021 GMC Sierra 1500.
The list does not include the 2018 and earlier Silverado or Sierra 1500, the 2022 and later trucks, or the HD models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Flipping the axle changes the driveline angles and the length of the brake lines, so both need to be checked after installation. Since this is a large drop, the shocks and the rear suspension travel should be checked as well.
What’s included
The kit is the rear drop flip kit under part number BEL6528. Belltech says C-notches are included in most rear flip kits, so confirm whether they are part of this set.










