Overview
The Belltech 2 inch drop spindle set, part number BEL2100, lowers the vehicle by relocating the wheel mounting point higher on the spindle casting. It provides a 2 to 3 inch lowering without changing the suspension or steering geometry. It is a spindle-based approach to lowering a sport truck.
Because the change is made at the spindle, the factory suspension arms, springs and shocks stay in place. The spindles are designed to keep suspension geometry intact and reduce the extra ball joint, shock and tire wear that other lowering methods can cause.
The spindles are built from OEM grade, high strength ductile iron and designed to meet or exceed factory specifications. The drop amount and fitment depend on the application, so check the vehicles covered below.
Key features
- 2 to 3 inch lowering from a relocated wheel mounting point
- Designed to avoid changing suspension or steering geometry
- Retains factory ride quality.
- Built from OEM grade high strength ductile iron
- Direct fit for the vehicles covered below
Before you lower a truck
Lowering a sport truck changes how the wheel sits in the wheel well, and the change affects several components beyond the suspension. The spindle moves the wheel mounting point, so brake lines, ABS wiring and any dust shields may need a fresh look to confirm their length and clearance. A drop of this kind should also be matched to the tires, because a larger wheel or tire can reduce clearance at full steering lock.
Alignment is the next consideration. Changing the wheel position alters camber and toe settings, so have a shop check the alignment after installation and before long drives. Shock absorbers and springs stay in place with a spindle drop, which means existing shocks should be inspected for wear, since they may work at a different angle than before.
- Check brake hose and ABS wire length
- Confirm tire clearance at full steering lock
- Inspect shocks for wear after the drop
- Get an alignment after installation
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL2100 |
| Product type | Drop spindle set |
| Drop | 2 to 3 inches |
| Material | OEM grade high strength ductile iron |
| Fitment | Direct fit |
Vehicle fitment
The spindle set fits these models: 1995–1997 Chevrolet Blazer; 1978–1987 Chevrolet El Camino; 1982–2003 Chevrolet S10; 1983–1989 and 1992–1994 Chevrolet S10 Blazer; 1983–1984 and 1992–1997 GMC Jimmy; 1982–1990 GMC S15; 1983–1989 GMC S15 Jimmy; 1994 GMC Safari; 1991–2003 GMC Sonoma; and 1997–2000 Isuzu Hombre.
The list does not include full-size Silverado or Sierra trucks, the Blazer or Jimmy years outside these ranges, or the 2004 and later S10 and Sonoma models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the wheel position changes where the brake hose, ABS wiring and any brake dust shield sit, so check their length and clearance after installation. Because the spindle replaces the factory knuckle position, confirm it with the spindle’s fit to your steering and brake components before driving.
What’s included
The set is the drop spindle set under part number BEL2100. Check the package contents against your installation before starting.









