Overview
The Belltech Nitro Drop 2 front shock absorber, part number BEL8006, is a front shock for lowered trucks and SUVs. Belltech designed the Nitro Drop 2 line for the truck and SUV market with a tuning balance that favors comfort while still improving the performance of the complete suspension.
Valving was reworked for daily drivers. Low speed compression was increased and rebound forces were adjusted, which gives a factory style ride comfort with better road feel and grip. The shock body is shortened to match the lowering method, so the travel suits the Belltech lowering kits and components it is used with.
It is a front shock for lowered vehicles and a direct fit. It fits a wide range of Chevrolet, GMC and Dodge trucks and SUVs from 1987 to 2004, including C1500, C2500 and C3500 models and the Suburban, Tahoe, Yukon, Dakota and Durango.
Key features
- Metal dust boots
- Hardened chrome 12.5 mm piston rods
- Triple lip NBR rod seal
- Teflon guide bushing
- 30 mm pistons with low friction Teflon seals
- 45 mm wide body for increased oil volume
- OEM quality rubber bushings
- Shortened body matched to Belltech lowering methods
Matching a shock to your lowering
A front shock on a lowered truck works at a different angle than it did at factory height, so the mount geometry and the shock’s extended length both matter. A shortened body keeps the piston within its useful stroke, which helps the damper control the spring without bottoming out on the bump stop. Pair the front shocks with the same lowering method on both sides, so the truck does not sit or handle unevenly.
Front shocks are often replaced alongside the springs, bushings and tie rod ends when a truck is lowered. Look for leaks on the body, worn upper mount bushings and cracked dust boots, which can let grit reach the seal. A comfort-tuned valving setup is easiest to judge after a few weeks of driving, so note any change in steering feel or body control before deciding on further work.
- Replace shocks in pairs on the same axle
- Inspect upper mounts and bushings
- Check dust boots for cracks
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL8006 |
| Position | Front |
| Lowering | Lowered |
| Piston rod | Hardened chrome, 12.5 mm |
| Piston | 30 mm with Teflon seals |
| Body | 45 mm wide body |
| Dust boots | Metal |
| Fitment | Direct fit |
Vehicle fitment
It fits 1988–1998 Chevrolet C1500 and 1992–1999 Chevrolet C1500 Suburban; 1988–2000 Chevrolet C2500 and C3500 and the C2500 Suburban from 1992 to 1999; 1995–1999 Chevrolet Tahoe; 1987–2004 Dodge Dakota; 1999–2003 Dodge Durango; 1988–1998 GMC C1500; 1992–1999 GMC C1500 Suburban; 1988–2000 GMC C2500 and C3500; 1992–1999 GMC C2500 Suburban; and 1992–1999 GMC Yukon.
The list does not include the 2000 and later Tahoe or Yukon, the Dodge Ram trucks, or the Silverado and Sierra 1500 models from 1999 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock is front-mounted on a lowered truck, check the clearance of the shock and its upper mount against the springs and the steering components after installation. The shortened body is matched to the lowering method, so the shock should be the one for your lowering kit.
What’s included
The product is one front shock absorber under part number BEL8006, with the dust boots and rubber bushings fitted.









