Overview
The Belltech Street Performance Rear Shock Absorber, part number 2210FF, is a twin tube rear shock for GM trucks lowered 5 to 7 inches at the rear. It fits 2001-2018 Chevrolet Silverado and GMC Sierra trucks in 1500, 2500 HD and 3500 HD models.
Belltech says its Street Performance twin tube shocks set the standard in performance handling, and that its engineers tuned the low speed compression characteristics of this shock, which controls the truck. Features include 15mm hardened chrome piston rods, a triple lip NBR rod seal and a 55mm wide body.
Key features
- Rear shock for vehicles with 5 to 7 inch rear lowering
- Twin tube design from the Street Performance line
- Metal dust boots
- Hardened chrome 15mm piston rods
- Triple lip NBR rod seal and Teflon guide bushing
- 35mm pistons with low friction Teflon seals
- 55mm wide body for increased oil volume
- OEM quality rubber bushings
- Sold individually
Choosing and fitting rear shocks
Rear shocks control how the axle moves over bumps and under braking, and they play a larger role once a truck has been lowered. A shock that has lost damping lets the rear end bounce, which can unsettle the truck on pavement and make loads feel less stable. Inspect the shock body for oil streaks, check the rubber bushings for cracks, and note any clunking over rough roads.
When choosing, match the shock length and mounting style to the amount of lowering rather than the model name alone. Rear shocks often get replaced together with leaf springs, bump stops and upper bushings, so inspect those parts when the old shocks come off. Keep dust boots intact to protect the piston rod from grit, and check brake lines and axle clearance after the truck settles at its new height.
- Oil leaking on the shock body
- Bouncing after bumps
- Uneven tire wear
- Cracked or worn bushings
Specifications
| Brand | Belltech |
|---|---|
| Part number | 2210FF |
| Product type | Rear shock absorber |
| Series | Street Performance |
| Shock type | Twin tube |
| Position | Rear |
| Intended lowering | 5 to 7 inches rear |
| Piston rod | 15mm hardened chrome |
| Piston | 35mm with low friction Teflon seals |
| Body | 55mm wide body |
| Rod seal | Triple lip NBR |
| Bushings | OEM quality rubber |
| Quantity | Individual shock |
| Fitment type | Direct fit |
Vehicle fitment
The 2210FF rear shock fits the 2007-2018 Chevrolet Silverado 1500, the 2001-2011 Silverado 2500 HD, the 2007 Silverado 2500 HD Classic, the 2007-2010 Silverado 3500 HD, the 2007-2018 GMC Sierra 1500, the 2001-2011 GMC Sierra 2500 HD, the 2007 Sierra 2500 HD Classic and the 2007-2010 Sierra 3500 HD.
The list does not include 1500 models before 2007 or after 2018. This shock is for vehicles lowered 5 to 7 inches at the rear, not for lifted trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is made for trucks with a rear drop, so confirm it suits your amount of lowering before installing. Tighten the mounting hardware to your vehicle’s torque values, and check that the dust boot and piston rod clear everything through full travel. Replace rear shocks as a pair, and check axle and brake line clearance with the truck lowered.
What’s included
One rear shock absorber. Features include metal dust boots and OEM quality rubber bushings.









