Overview
The Belltech Nitro Drop II rear shock absorber, part number BEL8510, is the entry level rear shock in the Belltech line. It is sized for vehicles with 5 to 7 inch rear lowering and is designed to do more than replace the OEM shock.
The shock fits the Chevrolet Colorado from 2015 to 2021, the Chevrolet Silverado 1500 from 1999 to 2014 and 2018, the GMC Canyon for 2016, the GMC Sierra 1500 from 1999 to 2014 and 2018, and the Dodge Ram 1500 from 1994 to 2001. Years and trims within those ranges are covered.
It is a rear shock and a direct fit for these vehicles. The lowering range and mounting points are the main checks before ordering.
Key features
- Rear shock absorber
- Fits vehicles with 5 to 7 inch rear lowering
- Entry level position in the Nitro Drop II line
- Direct fit for the vehicles above
Shock setup for lowered trucks
Rear shocks on a lowered truck work at a different length and angle than stock, so their mounting points and stroke need checking. A shock that runs near its limit can bottom out on bumps, while one with too much extension can strain the mounts. Matching the shock to the lowering range helps keep the damping and travel balanced.
Bump stops should be inspected when the rear is lowered, since they limit how far the axle can travel before the shock is fully compressed. Leaf spring trucks often show shock wear first at the lower mount, so look for cracked bushings or loose bolts. Check for oil seepage around the body, which signals a worn seal.
Shocks are usually replaced as a pair so both sides damp the same way. Rear shocks also work with the spring and axle, so check spring condition and mounts at the same time. Retighten all mounting hardware after the first few drives on rough roads.
- Replace rear shocks in pairs
- Inspect lower mounts for cracks
- Check for seepage around the seal
- Retighten hardware after early drives
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL8510 |
| Position | Rear |
| Rear lowering | 5 to 7 inches |
| Fitment | Direct fit |
Vehicle fitment
Fits 2015–2021 Chevrolet Colorado; 1999–2014 and 2018 Chevrolet Silverado 1500; 2007 Chevrolet Silverado 1500 Classic; 1994–2001 Dodge Ram 1500; 2016 GMC Canyon; 1999–2014 and 2018 GMC Sierra 1500; and 2007 GMC Sierra 1500 Classic.
The list does not include the 2019 to 2021 Silverado 1500 or Sierra 1500, the 2022 and later Colorado, or the Dodge Ram models after 2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the rear shock length and mounting points against your rear lowering before installation. The shock is sized for 5 to 7 inch lowering, so confirm your rear drop falls within that range.
What’s included
The product is one rear shock absorber under part number BEL8510.









