Overview
The Belltech Nitro Drop 2 rear shock absorber, part number BEL8522, is a rear shock for lowered trucks and SUVs. It is sold individually and matched to the lowering methods in the Belltech range by a shortened body that gives the correct travel.
The Nitro Drop 2 was built to balance shock tuning toward comfort without giving up performance. Low speed compression was increased and the rebound valving was reworked for daily driving, aiming for a factory style ride with better road feel and grip.
It fits Chevrolet Avalanche, Tahoe and Suburban models and GMC Yukon and Yukon XL models, in the years shown below.
Key features
- Metal dust boots
- Hardened chrome 12.5 mm piston rods
- Triple lip NBR rod seal
- Teflon guide bushing
- 30 mm pistons with low friction Teflon seals
- 45 mm wide body for increased oil volume
- OEM quality rubber bushings
Rear shock upkeep and fit
A rear shock on a full-size SUV carries a lot of the load when the rear is loaded with passengers or cargo. The shock’s job is to control the spring’s rebound and keep the tire in contact with the road. A shortened body keeps the stroke suited to the drop, so check that the upper and lower mounts are straight and that the bushings have not split.
Rear shocks are commonly replaced in pairs so both sides damp the same way. After installation, inspect the mounts for cracks and confirm the bump stops are not contacting the frame at full compression. Leaks from the shaft seal and a clunk over bumps are good signs that the shock is worn and should be checked.
- Replace rear shocks in pairs
- Check mounts and bushings for splits
- Watch for seal leaks and clunks
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL8522 |
| Position | Rear |
| Sold as | Individually |
| Piston rod | Hardened chrome, 12.5 mm |
| Piston | 30 mm with Teflon seals |
| Body | 45 mm wide body |
| Dust boots | Metal |
| Fitment | Direct fit |
Vehicle fitment
It fits 2007–2013 Chevrolet Avalanche models; 2006 Chevrolet Avalanche 1500; 2015–2019 Chevrolet Suburban; 2007–2014 Chevrolet Suburban 1500; 2000–2019 Chevrolet Tahoe; 2000–2019 GMC Yukon; 2015–2019 GMC Yukon XL; and 2007–2014 GMC Yukon XL 1500.
The list does not include the Silverado or Sierra 1500 pickups, the Colorado or Canyon, or the Dodge trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the rear shock length and mount clearance against the leaf springs or coil springs of the vehicle after installation, since the shortened body is matched to the lowering kit. The kit’s travel depends on the lowering method, so confirm the shock matches the lowering you are running.
What’s included
The product is one rear shock absorber under part number BEL8522, sold individually.









