Overview
The Baer Brakes 6801305RP is a polished Remaster master cylinder with a 1-1/8 inch bore, right side ports and a 4-bolt Mopar firewall mounting flange. The one-piece body is machined from 6061 T6 billet aluminum, and the billet top is held on with six allen screws.
Its outlet ports accept inverted flare fittings with removable brass seats, banjo fittings or straight fittings, so the same cylinder can work with different line styles. It suits most long and short boosters and manual brake applications, and optional proportioning valves are available. The 4-bolt flange fits many early Mopar applications. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 4-bolt Mopar firewall mounting bracket
- Fully machined 6061 T6 billet aluminum body
- Outlet ports take inverted flare, banjo or straight fittings
- Right side ports
- Machined, knurled screw-on caps for filling without spillage
- Polished body, caps and lid finish
- Dual integral reservoir with 7 oz per reservoir
Matching the brake system
A master cylinder works as the hydraulic link between the brake pedal and the wheel brakes, so its bore, outlet style and reservoir capacity need to suit the rest of the system. Booster type, pedal ratio and line routing all affect how the pedal feels once the new cylinder is installed.
Before buying, look at the lines already on the car. Inverted flare, banjo and straight outlets each need a matching fitting, and mixing styles often means replacing lines or adapters. If the vehicle uses a proportioning valve, decide early whether the existing valve will be reused or replaced with an optional unit.
- Confirm the booster type and pushrod length
- Note which outlet style the existing lines use
- Plan a new bleeder screw and hoses if the old ones are worn
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801305RP |
| UPC | 844165052197 |
| Series | ReMaster |
| Finish | Polished body, caps and lid |
| Body material | 6061 T6 billet aluminum |
| Bore size | 1.125 inch (1-1/8 inch) |
| Port exit | Right side |
| Outlet ports | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet fittings | Banjo without brass seat, or 3/16 inch inverted flare and tube nuts with brass seat |
| Flange type | 4-bolt Mopar |
| Reservoir | Integral dual, 6061 T6 billet aluminum |
| Reservoir size | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Removable seats | Yes |
| Stroke | 1.3 |
| Cap included | Yes |
| Mounting hardware included | No |
| Bleeder screw included | No |
| Quantity | One master cylinder assembly |
| Grade | Premium |
| Country of origin | USA |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the outlet style before bolting the cylinder to the firewall. Inverted flare outlets use the removable brass seats and tube nuts that come with the cylinder, while banjo outlets are fitted without a brass seat. Baer gives a fill level of 75 percent, or 5.25 oz per reservoir. After the cylinder is in place, bleed the brakes completely and test the pedal before driving.
What’s included
One master cylinder assembly with reservoir and cap, two brass seats and two tube nuts.
Not included: mounting hardware, bleeder screw, bleeder hoses, pressure switch, booster, gasket or seal and sensor.














