Overview
The Baer Brakes ReMaster 6801264RP is a polished master cylinder with a 15/16 inch (0.9375) bore and right side outlet ports. It uses a 2-bolt GM/Ford firewall flange, which Baer Brakes ties to many Ford and GM applications. The smaller bore is the defining spec of this unit, so match it to your brake setup before mounting.
The one-piece body is machined from 6061 T6 billet aluminum and finished polished, along with the caps and lid. Six allen screws hold the billet top, and two knurled screw-on caps make filling easier. Outlets accept inverted flare fittings with removable brass seats, or banjo and straight fittings. The unit suits most long and short boosters, including those with the included bullet, and manual brake systems.
Key features
- Polished 6061 T6 billet aluminum body and caps
- 15/16 inch (0.9375) bore
- Right side outlet ports
- 2-bolt GM/Ford firewall mounting bracket
- Outlets for inverted flare with removable seats, banjo or straight fittings
- Machined, knurled screw-on caps for spill-free filling
- Optional proportioning valves available
Matching bore to the brakes
The bore of a master cylinder sets how much fluid is pushed for each amount of pedal travel. A smaller bore produces higher line pressure for the same foot force, so it should be matched to the caliper and wheel cylinder sizes already on the vehicle. Mixing a small bore with large calipers can make the pedal feel long and the brakes slower to respond.
Before installing a smaller bore, review brake pressure, booster assist and pedal ratio. Stroke and area affect how far the pistons travel and how much fluid is moved, so consider them alongside the bore. Polished billet bodies show scratches clearly, so check the bore wall during installation, since scoring can damage seals.
- Confirm caliper sizes before choosing a bore
- Review booster assist with the new bore
- Inspect the bore for scratches during installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801264RP |
| UPC | 844165047575 |
| Series | ReMaster |
| Bore size | 15/16 inch (0.9375) |
| Flange type | 2-bolt GM/Ford |
| Body material | 6061 T6 billet aluminum |
| Body, caps and lid finish | Polished |
| Port exit | Right side |
| Outlet ports | 2, 3/8-24 inch |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare with tube nuts and brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent, or 5.25oz per reservoir |
| Removable seats | Yes |
| Area | 0.69 |
| Stroke | 1.1 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The 2-bolt GM/Ford firewall flange suits many Ford and GM applications. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Long push-rod hydro-boost and vacuum boosters can require spacer 6260258 so the ReMaster clears the booster push-rod. Decide between banjo and inverted flare outlets before assembly, because only the inverted flare option uses the brass seats and tube nuts. Bleed the hydraulic system after mounting, using your own bleeder screws and hoses.
What’s included
Contents are the master cylinder assembly, 2 brass seats and 2 tube nuts, plus the cap and integral dual reservoir.
Not included: booster, bleeder screws and hoses, brake pressure switch, sensor, gasket, mounting hardware, proportioning valves, and any spacer 6260258 a booster needs.














