Overview
The Baer Brakes Remaster 6801262LP is a left-port master cylinder with a 15/16 inch bore, sized for a 2-bolt GM and Ford firewall mount. Its one-piece body is machined from 6061 T6 billet aluminum, and it suits most long and short boosters or manual brake applications.
Choose this version when your lines exit on the left side. Two knurled screw-on caps let you fill both reservoirs without spilling fluid. The outlet ports take inverted flare fittings with removable seats, or banjo and straight fittings. Some long push-rod hydro-boost and vacuum boosters may need spacer part 6260258 to clear the booster push-rod.
Key features
- Machined 6061 T6 billet aluminum body, one piece
- Left side outlet ports with left-side port exit
- Outlet ports threaded 3/8-24 and fitted for inverted flare or banjo lines
- Machined, knurled caps for easy filling
- Gray anodized finish with black caps and lid
- Optional proportioning valves available from Baer
Left-port plumbing layout
With the outlet ports on the left, the hard lines and hose ends have to reach that side of the cylinder without rubbing on the engine bay, the steering shaft or the firewall. Route the lines before tightening anything, and support hoses so they cannot twist when the steering turns. A short test fit with the cylinder loosely mounted often shows a clearance problem early.
Left-side layouts are common on some builds, but the fittings still have to match the lines you already have. Banjo fittings need a sealing washer on each side, while inverted flare connections depend on clean, square ends. Replace any cracked hose or damaged flare before reconnecting, since a slow leak at a fitting is easy to miss.
- Check hose length and bend radius before tightening
- Keep brake lines clear of exhaust heat and moving parts
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801262LP |
| UPC | 844165047544 |
| Series | ReMaster |
| Bore size | 15/16 inch (0.9375 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish | Anodized, gray |
| Cap and lid color | Black, anodized |
| Flange type | 2-bolt GM/Ford |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Port exit | Left side |
| Fittings | Banjo (no brass seat) and 3/16 inch inverted flare with brass seat and tube nuts |
| Reservoir | Dual integral, 6061 T6 billet aluminum |
| Reservoir capacity | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Stroke | 1.1 |
| Area | 0.69 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
Port side is the main difference from the right-port 6801262RP, so confirm which side your lines exit.
Installation notes
Check booster pushrod clearance first, since a spacer such as part 6260258 may be required. Select the inverted flare or banjo fittings for the left outlet ports before routing the lines. Brake system work calls for a qualified technician.
What’s included
One master cylinder assembly, two brass seats, two tube nuts, a master cylinder cap and a dual integral reservoir come in the kit.
Not included: a brake booster, mounting bolts, bleeder screws and hoses, and any gasket, seal or brake pressure switch.














