Overview
The Baer Brakes Remaster 6801213RP is a polished master cylinder with a 1 inch bore and right side outlet ports, designed for a 2-bolt GM and Ford firewall flange. The body is one machined piece of 6061 T6 billet aluminum, and Baer describes it as suitable for most long and short boosters as well as manual brake applications.
Polished finish covers the body, caps and lid. The knurled caps are screw-on and designed to fill without spills. The outlet ports can be plumbed with inverted flare fittings using removable brass seats, or with banjo or straight fittings. Some long push-rod hydro-boost and vacuum boosters may need spacer part 6260258 so the cylinder clears the booster push-rod.
Key features
- Fully machined 6061 T6 billet aluminum construction
- Right side outlet ports
- Outlet ports threaded 3/8-24 for inverted flare, banjo or straight fittings
- Machined, knurled screw-on caps for fill access
- Polished body, caps and lid
- Dual integral reservoirs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801213RP |
| UPC | 844165046202 |
| Series | ReMaster |
| Bore size | 1 inch (1.000 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish | Polished |
| Caps and lid | Polished |
| Flange type | 2-bolt GM/Ford |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Port exit | Right side |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare with brass seat and tube nuts |
| Reservoir | Dual integral, 6061 T6 billet aluminum |
| Reservoir capacity | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Stroke | 1.1 |
| Area | 0.78 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
Fitment is not listed for the 6801213RP, so this polished cylinder cannot be matched to a particular car or truck from the data here. Compare its 2-bolt GM/Ford flange, 1 inch bore and booster pushrod length with your setup and the manufacturer’s specifications.
Polished finish is a cosmetic choice; the bore and port side are what determine whether the cylinder suits your plumbing.
Installation notes
Confirm pushrod clearance first, because part 6260258 may be needed on long push-rod boosters. Select inverted flare seats or banjo fittings before routing the right-side lines. Brake work should be performed by a qualified technician.
What’s included
The package holds one master cylinder assembly, two brass seats, two tube nuts, a master cylinder cap and an integral dual reservoir.
Not supplied with this polished cylinder: brake booster, mounting hardware, bleeder screws, bleeder hoses, gasket or seal, and a pressure switch.














