Overview
The Baer Brakes ReMaster 6801268LP is a polished master cylinder with a 1-1/8 inch bore, left side outlet ports and a 2-bolt GM/Ford firewall mounting flange. It turns pedal force into hydraulic pressure for the brake lines and is a compact one-piece unit for many Ford and GM applications.
The body is fully machined from 6061 T6 billet aluminum. Its billet top is fastened with 6 allen screws, and two large knurled screw-on caps let you fill the integral dual reservoirs without spilling fluid. Outlet ports accept inverted flare fittings using the included removable brass seats, or straight banjo-style fittings. The cylinder suits most long and short boosters, including the included bullet, as well as manual brake setups.
Key features
- Fully machined 6061 T6 billet aluminum body
- 2-bolt GM/Ford firewall mounting bracket
- Left side outlet ports
- Outlet ports suit inverted flare with removable brass seats, banjo, or straight fittings
- Knurled, machined screw-on caps for filling without spillage
- Optional proportioning valves are available separately
Before you buy
A master cylinder converts pedal force into hydraulic pressure, so its bore and outlet arrangement shape how the brakes feel at the pedal. Before buying, confirm that the bore matches the caliper and wheel cylinder setup you plan to run, and that the booster type works with the included bullet or your manual layout. Fit depends on year, model and trim, so compare those details with your vehicle first.
Billet bodies resist flexing under pressure, which helps keep pedal travel consistent over time. Replace bleeder screws and hoses if they are worn, since they are not part of the package. Use fresh brake fluid when refilling, and check the reservoir level after the first few stops.
- Match the bore to the calipers and wheel cylinders
- Check booster type before choosing a spacer
- Use new bleeder hardware during installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801268LP |
| UPC | 844165047605 |
| Series | ReMaster |
| Bore size | 1-1/8 inch (1.125) |
| Flange type | 2-bolt GM/Ford |
| Body material | 6061 T6 billet aluminum |
| Body and cap finish | Polished |
| Port exit | Left side |
| Outlet ports | 2, 3/8-24 inch |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare with tube nuts and brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent, or 5.25oz per reservoir |
| Removable seats | Yes |
| Stroke | 1.3 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The cylinder has a 2-bolt GM/Ford firewall flange, which suits many Ford and GM applications. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some long push-rod hydro-boost and vacuum boosters may need an additional spacer, part number 6260258, to position the ReMaster clear of the booster push-rod. Pick one outlet arrangement before assembly: banjo fittings need no brass seat, while inverted flare fittings use the included removable seats and tube nuts. Bleed the brakes after installation, since bleeder screws and hoses are not included.
What’s included
Includes 1 master cylinder assembly, 2 brass seats, 2 tube nuts, the master cylinder cap and the integral dual reservoir.
Not included: brake booster, bleeder screws, bleeder hoses, brake pressure switch, sensor, gasket or seal, mounting hardware, and spacer part 6260258 when a booster needs one.














