Overview
The Baer Brakes 6801274RP is a Remaster 2-bolt GM/Ford master cylinder with a 1-1/8 inch bore and right side ports, finished in black anodizing. It is a billet aluminum master cylinder assembly that mounts to a 2-bolt GM or Ford firewall bracket.
The Remaster is designed for many Ford and GM applications with a 2-bolt flange. The body is machined from 6061 T6 billet aluminum in a compact one-piece design. Six allen screws hold the billet top in place, and two large knurled screw-on caps make filling easier. It suits most long and short boosters or manual brake setups when used with the included bullet, and optional proportioning valves are available.
Key features
- Fully machined 6061 T6 billet aluminum construction
- 2-bolt GM/Ford firewall mounting bracket
- Right side outlet ports
- Outlet port design takes inverted flare with removable seats, banjo or straight fittings
- Machined, knurled screw-on caps for filling without spillage
- Anodized finish with laser-etched logo
Bench check and setup
A master cylinder is the start of the hydraulic circuit, so its bore and outlet arrangement set how the whole system responds. Matching the bore to the booster and pedal ratio keeps pedal travel and feel predictable. Plumbing matters too: line routing, fitting type and clearance from the chassis all affect how the system is installed.
Before installation, dry-fit the cylinder to the firewall bracket and check clearance to the booster and brake lines. After bleeding, look for weeping at each fitting, and confirm the pedal firms up with the engine off after several pumps. Replace the reservoir cap seal if fluid leaks around it, and keep the reservoir filled during the process.
- Dry-fit the cylinder before final tightening
- Use fresh brake fluid throughout the system
- Check the booster push-rod length before installing
- Bleed the circuit in the correct wheel order
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801274RP |
| UPC | 844165051237 |
| Series | ReMaster |
| Bore size | 1.125 inch (1-1/8 inch) |
| Flange type | 2 Bolt GM/Ford |
| Material | 6061 T6 Billet Aluminum |
| Finish | Black anodized body, caps and lid |
| Port exit | Right side |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port fittings | Banjo w/o brass seat, 3/16 inch inverted flare and tube nuts w/ brass seat |
| Removable seats | Yes |
| Reservoir type | Dual, integral style |
| Reservoir material | 6061 T6 Billet Aluminum |
| Reservoir size | 7oz per reservoir, fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.3 |
| Master cylinder cap included | Yes |
| Brake booster included | No |
| Gasket or seal included | No |
| Mounting hardware included | No |
| Country of origin | US |
Vehicle fitment
It is a 2-bolt GM/Ford style master cylinder made for many Ford and GM applications.
Measure your current bore and flange pattern against the existing master cylinder before buying. Confirm your vehicle’s year, model and trim fit before ordering.
Installation notes
Some long push-rod hydro-boost and vacuum boosters may need an additional spacer, p/n 6260258, to space the Remaster away from the booster push-rod. Check your booster before installing, and choose banjo or inverted flare fittings to match your brake lines. Check every fitting for leaks after bleeding.
What’s included
One Remaster master cylinder assembly with two brass seats, two tube nuts, the master cylinder cap and an integral dual reservoir.
Not included: brake booster, mounting hardware, gasket or seal, bleeder screws, bleeder hoses, brake pressure switch, sensor and the 6260258 spacer.














