Overview
The Baer Brakes Remaster 6801299LP is a polished 4-bolt Mopar master cylinder with a 15/16 inch bore and left side ports. It is a dual reservoir cylinder made from billet aluminum for brake systems that bolt to a 4-bolt Mopar firewall flange. No vehicle years, models or trims are named for this part, so check fit against your own vehicle before relying on it.
The one-piece body is fully machined from 6061 T6 billet aluminum and kept small and compact. Six allen screws secure the billet top, and two large knurled caps screw on so fluid can be added without spilling. The cylinder is designed for most long and short boosters, including setups with the included bullet, and for manual brake applications.
Key features
- Fully machined 6061 T6 billet aluminum construction
- 4-bolt Mopar firewall mounting bracket
- Left side ports for the outlet connections
- 3/8-24 outlet ports accept inverted flare fittings with removable brass seats, banjo style fittings or straight fittings
- Machined, knurled screw-on caps for filling without spillage
- Polished finish on the body, caps and lid
- Dual integral reservoir sized at 7oz per reservoir, or 5.25oz per reservoir when filled to 75 percent
Choosing the right setup
A master cylinder converts pedal force into hydraulic pressure for the whole brake circuit, so its bore, port layout and mounting flange must work with the booster, pedal arrangement and lines already on the vehicle. Before buying, measure how the existing cylinder mounts and which outlet fittings the lines use, then match those details rather than relying on general fitment.
Fitting style is often the deciding factor. Inverted flare connections seal against a brass seat and tube nut, while banjo connections rely on a sealing washer. Mixing the two styles usually means new lines or adapters, so settle the connection type before ordering hoses and brackets.
- Confirm the bore and flange match the existing hardware
- Decide between inverted flare and banjo outlets early
- Replace brake lines or adapters together with the cylinder when styles change
- Bleed the system after any cylinder change
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801299LP |
| UPC | 844165052067 |
| Series | Remaster |
| Body material | 6061 T6 billet aluminum |
| Body and lid finish | Polished |
| Bore size | 15/16 inch (0.9375 inch) |
| Mounting flange | 4 bolt Mopar |
| Port exit | Left side |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Outlet port fittings | Banjo without brass seat; 3/16 inch inverted flare with tube nuts and brass seat |
| Reservoir type | Dual, integral |
| Reservoir material | 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent, or 5.25oz per reservoir |
| Removable seats | Yes |
| Stroke | 1.1 |
| Area | 0.69 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Country of origin | USA |
| Box count | 1 |
Vehicle fitment
The 6801299LP is designed for many early Mopar applications and for most long and short boosters or manual brake setups, with 4-bolt firewall mounting.
Installation notes
Choose inverted flare or banjo outlet fittings before assembly, since the removable brass seats belong only to the inverted flare route. Mounting hardware, a bleeder screw and bleeder hoses are not included, so gather them before the cylinder is mounted and bled. After bleeding, look over every fitting for seepage before the vehicle returns to the road.
What’s included
One master cylinder assembly with cap, two brass seats and two tube nuts. The dual reservoir is integral and comes with the cylinder.
Not included: brake booster, bleeder screw, bleeder hoses, brake pressure switch, warning light connector, sensor, gasket or seal, and mounting hardware.













