Overview
The Baer Brakes Remaster 6801299RP is a 15/16 inch bore master cylinder with right side outlet ports and a 4-bolt mounting flange for early Mopar applications. It is a compact, 1-piece billet design that suits most long and short boosters as well as manual brake setups. Compare the bore, flange and port placement with your existing unit before fitting it.
The housing is cut from 6061 T6 billet aluminum and finished in polished metal, with a polished lid and polished caps. Two knurled screw-on caps sit on the dual reservoirs, so brake fluid can be added without spilling. Baer Brakes also offers optional proportioning valves for this unit.
Key features
- 4-bolt Mopar firewall mounting bracket
- Fully machined 6061 T6 billet aluminum construction
- Outlet ports take inverted flare fittings with removable seats, banjo fittings or straight fittings
- Right side ports
- Machined, knurled screw-on caps for filling without spillage
- Anodized Remasters carry laser-etched logos; this polished version is listed without an anodized finish
Finish and care
A polished billet body shows handling marks and water spots more readily than an anodized finish, so keep it clean with mild soap and a soft cloth. Avoid harsh polishing compounds on the body, since they can dull the surface and make later cleaning harder.
Polished metal is a surface finish only; it does not change how the cylinder moves fluid. The bore, reservoir layout and port size decide function, so compare those with the existing unit rather than the look. Inspect the caps and lid periodically for a seal that is not tight and for fluid residue around the seams.
Brake fluid absorbs moisture over time, so change it on the schedule the vehicle calls for. A fresh fill helps keep the internal seals and bore in good shape, and it keeps the reservoir clear of sediment.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801299RP |
| UPC | 844165052074 |
| Series | Remaster |
| Country of origin | USA |
| Sold as | Each |
| Body material | 6061 T6 billet aluminum |
| Body finish | Polished |
| Caps and lid finish | Polished |
| Bore size | 15/16 inch (0.9375 inch) |
| Stroke | 1.1 |
| Flange type | 4-bolt Mopar |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port exit | Right side |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare and tube nuts with brass seat |
| Removable seats | Yes |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Included | 1 master cylinder assembly, 2 brass seats, 2 tube nuts |
Vehicle fitment
The 6801299RP suits many early Mopar applications through its 4-bolt flange. Verify the bolt pattern and booster setup against your model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4-bolt flange bolts to a firewall bracket, and that mounting hardware is not included, so source firewall fasteners separately. The bleeder screw, bleeder hoses and brake pressure switch are also excluded. After installation, bleed the system and inspect each fitting for leaks before any road use.
What’s included
One master cylinder assembly, 2 brass seats and 2 tube nuts.
Not included: mounting hardware, bleeder screw, bleeder hoses, brake booster, brake pressure switch, gasket or seal, sensor.













