Overview
The Baer Brakes 6805210 is a 1 inch bore ReMaster kit that pairs a billet master cylinder with an adjustable proportioning valve and pre-bent 3/16 inch hardlines. Its ports exit on the left side, and the kit is supplied as one master cylinder assembly plus one proportioning valve. Verify your vehicle’s year, model and trim before placing an order.
Machined from 6061 T6 billet aluminum, the master cylinder has a gray anodized body with black anodized caps and lid. The valve has its own gray anodized finish and mounts on an integrated block designed to sit beneath the ReMaster master cylinder. The knob sets how braking pressure is split between the front and rear circuits.
Key features
- 1 inch bore master cylinder machined from 6061 T6 billet aluminum
- Gray anodized body and valve finish with black anodized caps and lid
- Knob-adjusted proportioning valve for front-to-rear pressure balance
- Integrated proportioning mounting block with two mounting holes
- Dual integral reservoir with removable seats
- Knurled screw-on caps for easy filling
- Pre-bent 3/16 inch hardlines with banjo and tube-nut fittings
- Made in the USA
Bore size and pedal feel
A bore sets how much fluid the master cylinder moves with each pedal stroke. A smaller bore moves less fluid per stroke, which changes pedal travel and effort compared with a larger bore. Matching the bore to caliper piston area and booster assist keeps the pedal predictable, so compare the bore with the rest of the brake system before any change.
The ports on this kit exit on the left side, which affects how the lines route under the dash or across the firewall. Plan the routing before tightening anything, keep lines away from heat and moving parts, and avoid tight bends near the fittings. After the first bleed, recheck pedal height and look for seepage at every joint. Pad wear and fluid age also change pedal feel over time.
- Match bore to caliper and booster setup
- Keep fittings square before final tightening
- Recheck pedal height after the first bleed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805210 |
| UPC | 90127856130 |
| Series | ReMaster |
| Kit contents | 1 master cylinder assembly, 1 proportioning valve |
| Bore size | 1 inch |
| Master cylinder material | 6061 T6 billet aluminum |
| Body finish | Gray anodized |
| Caps and lid finish | Black anodized |
| Proportioning valve finish | Gray anodized |
| Proportioning valve type | Adjustable, knob |
| Master cylinder outlet ports | 2 ports, 3/8-24 inch |
| Port exit | Left side |
| Proportioning inlet and outlet | 3/8-24 inch |
| Reservoir | Dual, integral style |
| Mounting holes | 2 |
| Removable seats | Yes |
| Warning light connector | No |
| Country of origin | USA |
Vehicle fitment
The firewall mounting bracket uses a 2-bolt GM/Ford style and is not part of the kit. Compare the bore size and port layout with your existing system before buying.
A 1 inch bore is the size to match against your calipers and pedal setup. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the 3/16 inch pre-bent lines to the valve and master cylinder before tightening the fittings. The mounting bracket, mounting hardware and gasket or seal are not included, so have them ready. Bleed the system and check every joint for leaks before road use.
What’s included
One master cylinder assembly with cap, one adjustable proportioning valve with mounting block hardware, pre-bent hardlines and the fittings for both units.
Not included: firewall mounting bracket, mounting hardware, brake booster, brake pressure switch, sensor, and gasket or seal.

















