Overview
The Baer Brakes ReMaster 6805204 is a black 1 inch bore master cylinder and proportioning valve kit with left-side ports. The kit contains one master cylinder assembly and one adjustable proportioning valve, along with pre-bent hardlines. No vehicle applications are confirmed for this part number.
The compact billet master is easier to package in tight engine bays, and the kit suits a wide range of front and rear brake combinations. The master cylinder is machined from 6061 T6 billet aluminum with black anodized caps and lid. The valve and its integrated mounting block share a black anodized finish, and the knob sets the proportioning balance.
Key features
- 1 inch bore master cylinder in machined 6061 T6 billet aluminum
- Black anodized caps and lid with a knurled screw-on design
- Black anodized adjustable proportioning valve with knob
- Integrated mounting block with two holes and included hardware
- Dual integral reservoir with removable seats
- Left-side ports with two master outlets and 3/8-24 inch valve ports
- 3/16 inch pre-bent hardlines with 3/8 inch inverted flare fittings
- Made in the USA
Choosing and fitting a master cylinder
A master cylinder converts pedal force into hydraulic pressure for the whole brake system. Its bore size, reservoir design and port layout set how much fluid moves and how the pedal feels, so a replacement needs to match the existing hydraulic setup as closely as possible. Many installers replace the hardlines and fittings at the same time when the old lines are rusted or unevenly flared.
A proportioning valve controls how pressure reaches the front and rear brakes, which helps limit rear lock-up under hard braking. Balance is usually set with the knob after the system is bled and tested. Because brake sizes, pad choice and tire grip all change the result, the setting should be checked on the road rather than assumed.
- Check that the reservoir seats and cap seal fully
- Inspect flare fittings for cracks before final torque
- Replace brake fluid after any hydraulic component change
- Look for fluid residue around the body and valve
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805204 |
| UPC | 90127856109 |
| Series | ReMaster |
| Kit contents | 1 master cylinder assembly, 1 proportioning valve |
| Bore size | 1 inch |
| Master cylinder material | 6061 T6 billet aluminum |
| Body finish | Black |
| Caps and lid finish | Black anodized |
| Proportioning valve finish | Black anodized |
| Mounting block finish | Black anodized |
| Proportioning valve type | Adjustable, knob |
| Master cylinder outlet ports | 2 ports, 3/8-24 inch |
| Port exit | Left side |
| Proportioning inlet and outlet | 3/8-24 inch |
| Reservoir | Dual, integral style |
| Mounting holes | 2 |
| Removable seats | Yes |
| Warning light connector | No |
| Country of origin | USA |
Vehicle fitment
No vehicle application is confirmed for the 6805204. The required firewall bracket is a 2-bolt GM/Ford style and is not included. Measure engine-bay clearance around the master cylinder and valve before buying.
Compare the bore size and port layout with your current hydraulic system. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the pre-bent hardlines to the valve and master cylinder before final tightening, and route them clear of moving parts. Check all fittings for leaks after bleeding the system.
What’s included
The kit includes one master cylinder assembly with cap, one adjustable proportioning valve with integrated mounting block hardware, pre-bent hardlines, and the fittings for each port.
Not included: firewall mounting bracket, mounting hardware, brake booster, brake pressure switch, sensor, and gasket or seal.

















