Overview
The Baer Brakes 6801304RP is a black anodized Remaster master cylinder with a 1-1/8 inch bore, right side ports and a 4-bolt Mopar firewall flange. The body, caps and lid carry a black anodized finish, and anodized Remasters are marked with laser-etched Baer logos.
The cylinder is machined in one piece from 6061 T6 billet aluminum. Its 3/8-24 inch outlet ports take inverted flare fittings with removable brass seats, or banjo and straight fittings. It suits most long and short boosters and manual brake applications, and optional proportioning valves are available. The 4-bolt Mopar flange fits many early Mopar applications.
Key features
- Black anodized body, caps and lid
- Laser-etched logo on anodized Remasters
- 4-bolt Mopar firewall mounting bracket
- Fully machined 6061 T6 billet aluminum
- Right side ports with 3/8-24 inch outlets
- Screw-on billet caps, machined and knurled
Caring for anodized parts
Anodizing gives aluminum a hard, protective surface, but it still needs regular attention in an engine bay. Brake fluid is the main concern, since it can strip the finish if it runs down the body. Wipe spills away with water and a mild cleaner, then rinse the area so residue does not sit on the surface.
Avoid abrasive pads, wire brushes and harsh solvents when cleaning the cylinder, as these can dull or scratch the anodized layer. Inspect the caps and lid for corrosion around fittings, and check the body for chips after any engine or bracket work. Clean finishes are easier to inspect for seepage, which is the first sign that a seal may need attention.
- Use a soft cloth and mild soap for routine cleaning
- Keep road salt and grime away from the caps
- Replace the cap if it no longer seals cleanly
- Recheck the fluid level after each brake service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801304RP |
| UPC | 844165052234 |
| Series | ReMaster |
| Color | Black |
| Finish | Anodized (body, caps and lid) |
| Body material | 6061 T6 billet aluminum |
| Bore size | 1.125 inch (1-1/8 inch) |
| Port exit | Right side |
| Outlet ports | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet fittings | Banjo without brass seat, or 3/16 inch inverted flare and tube nuts with brass seat |
| Flange type | 4-bolt Mopar |
| Reservoir | Integral dual, 6061 T6 billet aluminum |
| Reservoir size | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Removable seats | Yes |
| Stroke | 1.3 |
| Cap included | Yes |
| Mounting hardware included | No |
| Bleeder screw included | No |
| Quantity | One master cylinder assembly |
| Grade | Premium |
| Country of origin | USA |
Vehicle fitment
The cylinder is matched by bore, flange and port layout rather than to a named vehicle. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the outlet style before assembly: inverted flare outlets use the brass seats and tube nuts supplied, and banjo outlets are fitted without a brass seat. Mounting hardware and bleeder screws are not included. Once mounted, bleed the system fully and test the pedal.
What’s included
One master cylinder assembly with cap and integral reservoirs, two brass seats and two tube nuts.
Not included: mounting hardware, bleeder screw, bleeder hoses, pressure switch, booster, gasket or seal and sensor.














