Overview
The 6801300RP is a gray-bodied Remaster master cylinder for 4-bolt Mopar firewall mounts, with a 1 inch bore and right side ports. Its body is 6061 T6 billet aluminum with a gray anodized finish, while the caps and lid are black anodized. The design suits many early Mopar applications and works with most long and short boosters or manual brake systems.
Anyone looking for a right-exit Mopar cylinder in gray will find the port layout on the right side. Two 3/8-24 outlet ports take inverted flare fittings with removable seats, banjo style fittings or straight fittings, and the dual reservoirs are integral with the body.
Key features
- Fully machined 6061 T6 billet aluminum body in gray anodized finish
- Black anodized caps and lid
- Right side ports
- 4-bolt Mopar firewall mounting bracket
- Dual integral reservoir with machined, knurled screw-on caps
- Outlet ports accept inverted flare (with removable seats), banjo or straight fittings
Before you buy
Start with the port side. A right-exit cylinder routes its lines out the right side of the body, and the left-exit version is a mirror layout, so mismatched lines can end up stretched or kinked across the engine bay. Lay out the existing brake hard lines and hoses before ordering, and compare the firewall bolt pattern with your current cylinder. Mounting hardware is usually sourced separately, so plan for that before the work starts.
Booster pairing is the other check. A master cylinder has to match the booster type and pushrod length in the rest of the brake setup, or pedal height and feel will change. Cars with manual brakes use the same bore and port choices without a booster, so confirm which arrangement the vehicle runs. Inverted flare fittings need seats and nuts that match the line ends, so have them ready. Keep the seats and nuts together in a labeled bag so nothing is lost mid-job.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801300RP |
| UPC | 844165052159 |
| Series | ReMaster |
| Bore size | 1 inch (1.00 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish | Gray anodized |
| Caps and lid finish | Black anodized |
| Flange type | 4 bolt Mopar |
| Port exit | Right side |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port fittings | Banjo without brass seat, 3/16 inch inverted flare and tube nuts with brass seat |
| Removable seats | Yes |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir, fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.1 |
| Area | 0.78 |
| Volume ratio | 0.0840277777777778 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
The 6801300RP uses a 4-bolt Mopar firewall flange and suits many early Mopar applications. Compare its bolt pattern and booster setup with your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bleeder screw, bleeder hoses, mounting hardware, brake booster and pressure switch are not included, so arrange those before the installation begins. The brass seats and tube nuts go with the inverted flare outlet. After installation, bleed the brake lines completely and confirm firm pedal travel before driving.
What’s included
- 1 master cylinder assembly with integral dual reservoir
- Master cylinder cap
- 2 brass seats and 2 tube nuts
Not included: bleeder screws, bleeder hoses, brake booster, brake pressure switch, sensor, gasket or seal, mounting hardware.













