Overview
The Baer Brakes 6801301LP is a left-port Remaster master cylinder for 4-bolt Mopar firewall installs. It has a 1 inch bore, a black anodized body and a left side port exit, and the cylinder is machined from one piece of 6061 T6 billet aluminum. It suits many early Mopar applications and works with most long and short boosters or manual brake setups.
If your plumbing runs out the left side of the cylinder, this is the left-exit counterpart to the right-port 6801301RP in the same black anodized finish. Two 3/8-24 outlet ports can be set up for inverted flare with removable seats, banjo style or straight fittings, and the reservoirs are integral to the body.
Key features
- One-piece body of fully machined 6061 T6 billet aluminum
- Left side ports for left-exit plumbing
- 4-bolt Mopar firewall mounting bracket
- Dual integral reservoirs, 7oz each, filled to 75 percent or 5.25oz per reservoir
- Knurled, machined screw-on caps reduce spills while filling
- Black anodized body, caps and lid, with laser-etched logos
Choosing a master cylinder setup
A master cylinder turns pedal force into hydraulic pressure for all four wheels, so its bore, port layout and mounting flange all need to suit the plumbing and firewall it goes onto. Left and right port versions are mirror layouts, and choosing the wrong side can leave lines stretched or kinked. Measure your existing line routing before ordering.
Booster compatibility matters as much as bore size. The cylinder must match the pushrod length and pedal geometry of the booster it pairs with, or pedal height and feel will change. Manual systems use the same cylinder without a booster, so confirm which arrangement the car runs before buying.
Inverted flare outlets need seats and tube nuts that match the line ends, so have the fittings ready before the lines are routed. Keep brake fluid clean and use the type the vehicle calls for in its service information.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801301LP |
| UPC | 844165052166 |
| Series | ReMaster |
| Bore size | 1 inch (1.00 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish | Black anodized |
| Caps and lid finish | Black anodized |
| Flange type | 4 bolt Mopar |
| Port exit | Left side |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port fittings | Banjo without brass seat, 3/16 inch inverted flare and tube nuts with brass seat |
| Removable seats | Yes |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir, fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.1 |
| Area | 0.78 |
| Volume ratio | 0.0840277777777778 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
The 6801301LP is built for 4-bolt Mopar firewall mounts, so match the firewall bolt pattern and booster setup to your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting hardware, bleeder screws, bleeder hoses and a brake booster are not supplied, so gather them before starting work. Brass seats and tube nuts are included for the inverted flare option. Bleed the hydraulic circuit fully after installation and check the pedal before the car is driven.
What’s included
- 1 master cylinder assembly with integral dual reservoir
- Master cylinder cap
- 2 brass seats and 2 tube nuts
Not included: bleeder screws, bleeder hoses, brake booster, brake pressure switch, sensor, gasket or seal, mounting hardware.














