Overview
Baer Brakes’ ReMaster 6801264LP is a polished master cylinder for 2-bolt GM/Ford firewall installations, with a 15/16 inch (0.9375) bore and left side outlet ports. Baer Brakes positions the unit for many Ford and GM applications, including use with long and short boosters and manual brake systems.
The one-piece body is billet 6061 T6 aluminum, finished polished throughout, including the caps. Six allen screws secure the top, and two knurled screw-on caps make filling simple. The outlets can take inverted flare fittings with the included removable brass seats, banjo fittings, or straight fittings, so the plumbing choice stays open.
Key features
- Polished billet 6061 T6 aluminum construction
- 15/16 inch (0.9375) bore
- Left side outlet ports
- Dual integral reservoir in billet aluminum
- Outlets for inverted flare, banjo or straight fittings
- 2-bolt GM/Ford firewall bracket
- Optional proportioning valves available
Left port plumbing
Left side outlets place the brake line connections on the driver side of the cylinder, which can help when routing lines around the brake booster and firewall. Plan the bend radius of each line before tightening, because tight curves can crack a flare or pinch the line. Keep lines clear of heat sources and moving suspension parts.
Banjo and flare choices both work with the left side outlets, but each style needs its own parts. Banjo fittings use sealing washers and go on without a brass seat, while flare connections need the seats and tube nuts. Dry-fit the lines before final tightening, and check clearance around the reservoir cap so it can be removed for fluid checks.
- Dry-fit lines before final tightening
- Keep lines clear of exhaust and heat
- Check clearance around the reservoir cap
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801264LP |
| UPC | 844165047568 |
| Series | ReMaster |
| Bore size | 15/16 inch (0.9375) |
| Flange type | 2-bolt GM/Ford |
| Body material | 6061 T6 billet aluminum |
| Body, caps and lid finish | Polished |
| Port exit | Left side |
| Outlet ports | 2, 3/8-24 inch |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare with tube nuts and brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent, or 5.25oz per reservoir |
| Removable seats | Yes |
| Area | 0.69 |
| Stroke | 1.1 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The 2-bolt GM/Ford firewall flange suits many Ford and GM applications. Confirm fit for your vehicle’s year, model and trim before ordering, and check the flange against your firewall.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some long push-rod hydro-boost and vacuum boosters may need spacer 6260258 to keep the cylinder off the booster push-rod. Plan the left port routing before the lines are bent, and remember the removable brass seats apply only to inverted flare fittings. Plan a full brake bleed once the unit is mounted.
What’s included
In the package: 1 master cylinder assembly with 2 brass seats, 2 tube nuts, cap and integral dual reservoir.
Not included: brake booster, bleeder screws, bleeder hoses, pressure switch, sensor, gasket or seal, mounting hardware, optional proportioning valves, and spacer 6260258 when needed.














