Overview
The Baer Brakes Remaster 6801238LP is a master cylinder with a 1 inch bore and left side outlet ports, made for a 2-bolt GM and Ford firewall flange. The one-piece body is machined from 6061 T6 billet aluminum and suits most long and short boosters as well as manual brake systems.
This version fits layouts where the lines leave the cylinder on the left. Two knurled screw-on caps allow filling without spillage. The outlet ports take inverted flare fittings with removable seats, or banjo and straight fittings. Some long push-rod hydro-boost and vacuum boosters need spacer part 6260258 to clear the booster push-rod.
Key features
- Machined 6061 T6 billet aluminum, one-piece body
- Left side outlet ports
- Outlet threads of 3/8-24 for inverted flare, banjo or straight fittings
- Machined, knurled caps for easy filling
- Gray anodized body with black caps and lid
- Dual integral reservoir
Left port plumbing
With the outlets on the left, the line routing is the first thing to settle. Look at where the master cylinder will sit relative to the steering column, the brake pedal arm and any hoses that run along the firewall. Left-side lines often cross those areas, so a clear path should be confirmed before the fittings are chosen.
The seat style also affects the job. Inverted flare fittings use the included seats and tube nuts, which suit a clean, flared line end. Banjo fittings need their own sealing washers and must be aligned without twisting the hose. Whichever style is picked, keep the lines supported so they do not rub against brackets or chafe over time.
- Confirm the left-side line path clears the steering column
- Flare tubing ends squarely for a clean seal
- Support lines with clips so they do not chafe
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801238LP |
| UPC | 844165046189 |
| Series | ReMaster |
| Bore size | 1 inch (1.000 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish | Anodized, gray |
| Cap and lid color | Black, anodized |
| Flange type | 2-bolt GM/Ford |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Port exit | Left side |
| Fittings | Banjo (no brass seat); 3/16 inch inverted flare with brass seat and tube nuts |
| Reservoir | Dual integral, 6061 T6 billet aluminum |
| Reservoir capacity | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Stroke | 1.1 |
| Area | 0.78 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The left port exit separates this cylinder from the right-port 6801238RP.
Installation notes
Check pushrod clearance on the booster before mounting, since spacer part 6260258 may be necessary. Pick inverted flare seats or banjo fittings for the left outlets before routing the lines. A qualified technician should handle brake system work.
What’s included
The kit includes one master cylinder assembly, two brass seats, two tube nuts, a master cylinder cap and a dual integral reservoir.
Not included: The kit leaves out the brake booster and mounting hardware. Bleeder screws, bleeder hoses, gasket or seal and brake pressure switch are not supplied.














