Overview
The Baer Brakes Remaster 6801262RP is a master cylinder with a 15/16 inch bore and right side outlet ports, built for a 2-bolt GM and Ford firewall flange. Its one-piece body is machined from 6061 T6 billet aluminum and suits most long and short boosters as well as manual brake setups, with an included bullet where needed.
Two large knurled screw-on caps make filling the reservoirs easier without spills. The outlet ports accept inverted flare fittings with the included removable brass seats, or banjo and straight fittings. Some long push-rod hydro-boost and vacuum boosters may need spacer part 6260258 to hold the cylinder away from the booster push-rod, and optional proportioning valves are available.
Key features
- Fully machined 6061 T6 billet aluminum construction
- Right side outlet ports for right-hand plumbing
- Outlet ports use 3/8-24 threads and take inverted flare, banjo or straight fittings
- Knurled, machined screw-on caps for filling without spillage
- Gray anodized body with black anodized caps and lid
- Laser-etched logos on anodized Remasters
Choosing the right setup
A master cylinder is only one part of the hydraulic system, so it should be chosen together with the booster, pedal ratio and brake lines. Matching the bore to the pedal travel and the fluid volume the calipers need helps the pedal feel firm instead of soft. Before ordering, confirm the mounting pattern and the pushrod length at the booster, since those dimensions decide whether the cylinder seats squarely on the firewall.
Plumbing is the other major consideration. Inverted flare seats seal well at the outlet ports but depend on correct tube nuts and clean threads, while banjo fittings rely on sealing washers being replaced each time they are disturbed. Whichever style is chosen, route the lines so they clear the steering shaft, headers and suspension travel, and avoid tight bends near the reservoir.
- Clean the bore and seats thoroughly before assembly
- Replace banjo washers whenever a fitting is loosened
- Bleed the system in the correct order after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801262RP |
| UPC | 844165047551 |
| Series | ReMaster |
| Bore size | 15/16 inch (0.9375 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish and color | Anodized gray |
| Caps and lid | Black, anodized |
| Flange type | 2-bolt GM/Ford |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Port exit | Right side |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare with brass seat and tube nuts |
| Reservoir type | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Stroke | 1.1 |
| Area | 0.69 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
Right side ports and the 15/16 inch bore are the two dimensions to match before choosing this cylinder.
Installation notes
Measure booster pushrod clearance before installing. A long push-rod booster may need spacer part 6260258. Choose either the inverted flare seats or the banjo setup for the outlet ports before plumbing the lines. Brake work should be done by a qualified technician.
What’s included
The kit includes one master cylinder assembly, two brass seats, two tube nuts, a master cylinder cap and an integral dual reservoir.
Not included: Baer supplies no brake booster, mounting hardware, bleeder screws or bleeder hoses with this cylinder, and no gasket or seal.














