Overview
The Baer Brakes ReMaster 6801213LP is a polished master cylinder with a 1 inch bore, left side ports and a 2-bolt GM/Ford firewall mounting flange, built for many Ford and GM applications. Its compact, one-piece body is machined from 6061 T6 billet aluminum, and the billet top is held on with six allen screws.
The ReMaster is compatible with most long and short boosters, including setups that use an included bullet, and with manual brake applications. Some long push-rod hydro-boost and vacuum boosters need an additional spacer, p/n 6260258, to space the ReMaster away from the booster push-rod. Optional proportioning valves are also available.
Key features
- Fully machined 6061 T6 billet aluminum construction
- Left side ports with a 2-bolt GM/Ford firewall mounting bracket
- Outlet port design takes inverted flare fittings with removable brass seats, banjo style or straight fittings
- Machined and knurled screw-on caps for filling without spillage
- Dual integral reservoir made from 6061 T6 billet aluminum
- Anodized finish with laser-etched logos
Before you swap the cylinder
A master cylinder sets the feel and reach of the whole braking system, so bore size and port layout should match the booster and lines on the vehicle. Replacing one usually means checking the booster push-rod length first, since a short or long rod changes how far the piston travels and how the pedal feels. Confirm the bore, flange and push-rod clearance before the old unit is removed.
Routine inspection is simple. Look for fluid weeping around the caps and the flange, a soft pedal that sinks under steady pressure, and fluid that has darkened or contains debris. Any of these signs points to seals or the bore needing attention. Replacing the cylinder is also a good time to inspect the brake lines, fittings and seats for corrosion, since the new unit connects to them.
- Check push-rod clearance before removing the old unit
- Inspect fittings and seats for corrosion
- Bleed the full system after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801213LP |
| UPC | 844165046196 |
| Series | ReMaster |
| Bore size | 1 inch |
| Material | 6061 T6 billet aluminum |
| Finish | Polished body, caps and lid |
| Flange type | 2-bolt GM/Ford |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Port exit | Left side |
| Removable seats | Yes |
| Reservoir type | Dual, integral |
| Reservoir size | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Stroke | 1.1 |
| Country of origin | US |
Vehicle fitment
Vehicle fit is defined by the 2-bolt GM/Ford firewall flange and the 1 inch bore. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A long push-rod hydro-boost or vacuum booster may need the spacer p/n 6260258 to clear the booster push-rod. Plan for a full brake fluid bleed after installation.
What’s included
The package includes 1 master cylinder assembly, 2 brass seats and 2 tube nuts. The master cylinder cap is included, and the dual reservoir is part of the assembly.
Not included: Brake booster, bleeder screws, bleeder hoses, mounting hardware, gasket or seal, brake pressure switch and sensor.














