Overview
The Baer Brakes ReMaster 6801297RP is a 4-bolt Mopar master cylinder with a 0.9375 inch (15/16 inch) bore and right side outlet ports. Its flange follows the 4-bolt firewall layout used on many early Mopar applications, and the cylinder is designed for most long and short boosters or manual brake setups, with the included bullet.
The body is one compact piece of 6061 T6 billet aluminum with a gray anodized finish, black anodized caps and lid, and laser-etched logos on the anodized versions. Outlet ports take inverted flare fittings with the included removable brass seats, banjo fittings, or straight fittings, and the dual integral reservoir has two large knurled screw-on caps for filling without spillage.
Key features
- One-piece, fully machined 6061 T6 billet body
- Right side ports with two 3/8-24 outlet ports
- 4-bolt Mopar firewall mounting bracket
- Billet top held by six allen screws
- Knurled screw-on caps for filling without spillage
- Banjo, inverted flare, or straight outlet fittings
- Anodized finish with laser-etched logos
- Optional proportioning valves are also offered
Proportioning valves and add-ons
A proportioning valve limits pressure to the rear brakes so the rear wheels do not lock before the fronts under hard braking. Many systems pair a master cylinder change with a valve check, since the front-to-rear balance depends on the pressure the cylinder delivers. Confirm the valve’s port and fitting style match the lines before installing it.
Pedal feel, bore size and reservoir volume all affect how the system behaves, so a change in one part can shift the others. When the master cylinder is replaced, inspect the brake lines, hoses and fittings in the same job. Old hoses that have swelled or cracked should be replaced rather than reused, because they can fail under pressure.
- Check the front-to-rear balance after any hydraulic change
- Inspect lines and fittings while the system is open
- Settle the fitting style before final assembly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801297RP |
| UPC | 844165052098 |
| Series | ReMaster |
| Sold as | Each |
| Bore size | 0.9375 inch (15/16 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish and color | Anodized gray |
| Cap and lid finish | Anodized black |
| Flange type | 4 bolt Mopar |
| Port exit | Right side |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port fittings | Banjo without brass seat, 3/16 inch inverted flare and tube nuts with brass seat |
| Reservoir type | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Removable seats | Yes |
| Area | 0.69 |
| Stroke | 1.1 |
| Grade | Premium |
| Country of origin | USA |
Vehicle fitment
Fit depends on the specific vehicle. The flange is intended for many early Mopar applications with a 4-bolt firewall layout.
Compare bore, flange and port layout with your existing brake setup before ordering.
Installation notes
The 4-bolt flange mounts to the firewall bracket, and six allen screws secure the billet top. Choose between inverted flare and banjo outlet fittings before final assembly, since the included brass seats and tube nuts suit the 3/16 inch inverted flare option. Have a bleeder screw and hoses ready before bleeding, because bleeder hardware is not part of the kit.
What’s included
One master cylinder assembly with two brass seats, two tube nuts, two knurled screw-on caps, and the dual integral reservoir.
Not included: Plan on sourcing the brake booster, bleeder screw and bleeder hoses, brake pressure switch, warning light connector, sensor, mounting hardware, and gasket or seal separately.













