Overview
A left port gray anodized ReMaster, the Baer Brakes 6801266LP is a master cylinder with a 1-1/8 inch bore and a 2-bolt GM/Ford firewall mount. Its outlet ports sit on the left side. It suits many Ford and GM applications and works with the included bullet on long and short boosters, or with manual brake setups.
Built from one piece of 6061 T6 billet aluminum, the body has a gray anodized finish, while the caps and lid are black and anodized. Six allen screws secure the billet top. Two large knurled screw-on caps allow the reservoirs to be topped up cleanly. The outlet ports take inverted flare fittings with removable brass seats, banjo fittings, or straight fittings.
Key features
- Left side outlet ports
- Gray anodized body with black anodized caps and lid
- One-piece machined 6061 T6 billet aluminum
- 2-bolt GM/Ford firewall mounting bracket
- Knurled screw-on caps for clean filling
- Anodized units carry laser-etched logos
- Optional proportioning valves are offered separately
Care and bleeding
Bleeding removes air from the hydraulic circuit, and a spongy pedal is often the first sign that air has entered. Bleed the lines in the correct order, starting at the wheel farthest from the master cylinder, and keep the reservoir topped up so air is not drawn back in. Use fluid from a sealed container and avoid mixing fluid types.
Billet aluminum bodies are durable, but the caps and seals still need regular checks. Inspect the caps for cracks, keep the threads clean, and look at the flare seats for corrosion. Anodized finishes handle normal cleaning, yet harsh chemicals and scrubbing pads can wear the color away over time.
- Bleed from the wheel farthest from the cylinder
- Keep the reservoir above the minimum line
- Replace cracked caps rather than reusing them
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801266LP |
| UPC | 844165047582 |
| Series | ReMaster |
| Bore size | 1-1/8 inch (1.125) |
| Flange type | 2-bolt GM/Ford |
| Body material | 6061 T6 billet aluminum |
| Body color and finish | Gray, anodized |
| Caps and lid color and finish | Black, anodized |
| Port exit | Left side |
| Outlet ports | 2, 3/8-24 inch |
| Outlet fittings | Banjo without brass seat; 3/16 inch inverted flare with tube nuts and brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent, or 5.25oz per reservoir |
| Removable seats | Yes |
| Stroke | 1.3 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The flange is 2-bolt GM/Ford, and the cylinder is positioned for many Ford and GM applications. Match it to your car or truck by year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some long push-rod hydro-boost or vacuum boosters require spacer 6260258 to create clearance between the cylinder and the push-rod. Choose banjo or inverted flare fittings for the left ports before routing the lines. Expect to bleed the brakes after mounting, because bleeder screws and hoses are supplied separately.
What’s included
Supplied items: master cylinder assembly, 2 brass seats, 2 tube nuts, and the cap with integral dual reservoir.
Not included: brake booster, bleeder screws, bleeder hoses, brake pressure switch, sensor, gasket or seal, mounting hardware, and spacer 6260258 if your booster calls for it.














