Overview
The Baer Brakes ReMaster 6805209 is a gray master cylinder and proportioning valve kit with a 15/16 inch bore and left-side ports. The master cylinder is machined from 6061 T6 billet aluminum, and the kit adds an adjustable proportioning valve and pre-bent 3/16 inch hardlines with 3/8 inch inverted flare fittings. It is a complete brake hydraulic bundle. Confirm fit against your vehicle’s year, model and trim before buying.
The package is intended for manual or power brake setups in classic GM and Ford applications. The gray anodized valve sits on a gray integrated mounting block beneath the master cylinder, and the screw-on caps are knurled for filling. Confirm the 15/16 inch bore against your existing hydraulics and pedal arrangement before ordering.
Key features
- Gray billet master cylinder with a 15/16 inch bore
- Gray anodized proportioning valve with knob adjustment
- Gray integrated mounting block with two mounting holes
- Black anodized screw caps and lid, knurled for easier filling
- Left-side master cylinder and valve ports with 3/8-24 inch outlets
- Pre-bent hardlines with 3/8 inch inverted flare fittings
- Dual integral reservoir with removable seats
- Made in the USA
Pedal feel and bore choice
A 15/16 inch bore sits between smaller and larger master cylinder options, so the pedal feel will depend on the calipers, booster and pad material in the rest of the system. Pedal travel, effort and fluid volume all shift as the bore changes, which is why the bore should be compared against the existing setup before any work begins.
For manual or power brake setups, a firm pedal after bleeding is the goal. Inspect the pedal pivot, pushrod and booster vacuum line, since worn parts can mimic a master cylinder problem. Keep the gray integrated block and valve free of road grime, and check the caps for seal condition during routine service.
Hardlines should be routed away from exhaust heat and suspension travel, with the pre-bent sections supported so they do not rely on the fittings for strain relief.
- Check pedal pivot and pushrod wear
- Confirm booster vacuum before bleeding
- Inspect caps and seals at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805209 |
| UPC | 90127856123 |
| Series | ReMaster |
| Kit contents | 1 master cylinder assembly, 1 proportioning valve |
| Bore size | 15/16 inch (0.9375) |
| Master cylinder material | 6061 T6 billet aluminum |
| Body finish | Gray anodized |
| Caps and lid finish | Black anodized |
| Proportioning valve finish | Gray anodized |
| Mounting block color | Gray |
| Proportioning valve type | Adjustable, knob |
| Master cylinder outlet ports | 2 ports, 3/8-24 inch |
| Port exit | Left side |
| Proportioning inlet and outlet | 3/8-24 inch |
| Reservoir | Dual, integral style |
| Mounting holes | 2 |
| Removable seats | Yes |
| Warning light connector | No |
| Country of origin | USA |
Vehicle fitment
The mounting reference is a 2-bolt GM/Ford firewall bracket style, so the specific year, make or model should be confirmed before ordering. Check the bore size, port side and firewall bracket layout first.
Compare the 15/16 inch bore with your current caliper and pedal setup before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 3/16 inch hardlines come pre-bent, so trial-fit them to the valve and master cylinder before tightening the 3/8 inch inverted flare fittings. Bleeder screws and bleeder hoses are not included, so have them ready before bleeding the brakes. Test the pedal and inspect each fitting for leaks before driving.
What’s included
One master cylinder assembly with cap, one adjustable proportioning valve with integrated mounting block and hardware, pre-bent hardlines and fittings.
Not included: firewall mounting bracket, mounting hardware, bleeder screws, bleeder hoses, brake booster, brake pressure switch, sensor, and gasket or seal.

















