Overview
The Baer Brakes 6801328RP is a Remaster master cylinder for 1999 to 2004 Ford Mustang SN95 models fitted with hydroboost brakes. It has a 1-1/8 inch (1.125) bore, right side outlet ports and a two-bolt mounting flange designed for the SN95 hydroboost firewall bracket. Baer builds the body from 6061 T6 billet aluminum and finishes this unit in black anodized.
The master cylinder is a compact one-piece body with a dual integral reservoir and two large knurled screw-on caps, which make the reservoirs easier to fill without spilling. The outlet design accepts either inverted flare fittings using the included removable brass seats, or banjo and straight fittings. It suits owners rebuilding the front brake hydraulics on a hydroboost SN95 Mustang who want a billet replacement with a right port exit.
Key features
- Fully machined 6061 T6 billet aluminum construction
- Two-bolt SN95 hydroboost firewall mounting flange
- Right side ports with 3/8-24 outlet threads
- Outlets accept inverted flare with removable brass seats, banjo, or straight fittings
- Machined, knurled screw-on caps for filling without spillage
- Anodized finish with laser-etched Remaster logos
Choosing a master cylinder setup
A master cylinder converts pedal force into hydraulic pressure for the front brakes, so its condition affects how firm and consistent the pedal feels. On a hydroboost car the booster supplies the assist, which means the cylinder works with a higher line pressure than a vacuum-assisted setup. Matching the bore, flange and port exit to the existing hardware is the first step before any purchase.
Many owners replace the master cylinder together with the front brake lines and proportioning valve when they rebuild a system, since old hoses and fittings can hide leaks or corrosion. Inspect the booster pushrod, firewall mounting and reservoir for seepage and wear before bolting anything in. Keeping a bleeding routine ready makes the job easier and helps remove air from the new cylinder.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801328RP |
| UPC | 844165054252 |
| Series | Remaster |
| Body material | 6061 T6 billet aluminum |
| Finish | Black anodized body, caps and lid |
| Bore size | 1.125 inch (1-1/8 inch) |
| Outlet port size | 3/8-24 inch, 2 outlet ports |
| Port exit | Right side |
| Flange type | 2 bolt, 1999-04 SN95 Mustang hydroboost specific |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.3 |
| Removable seats | Yes, 2 brass seats included |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It fits the 1999-04 SN95 Mustang equipped with hydroboost brakes.
It does not cover Mustangs without hydroboost brakes, since the flange is specific to the hydroboost firewall bracket. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting hardware is not included, so the mounting bolts for the two-bolt flange must be sourced separately. Choose the outlet connection before assembly: the included brass seats and tube nuts suit 3/16 inch inverted flare lines, and the same ports also take banjo or straight fittings. Bleed the brake hydraulics after installation and check every fitting for leaks before driving.
What’s included
One master cylinder assembly with reservoir and cap, two brass seats and two tube nuts.
Not included: brake booster, mounting hardware, bleeder screw, bleeder hoses, brake pressure switch, gasket or seal, and sensor.













