Overview
The Baer Brakes ReMaster 6805205 is a black master cylinder and proportioning valve kit with a 1-1/8 inch bore and left-side ports. It is supplied with one master cylinder assembly and one proportioning valve, plus pre-bent hardlines with 3/8 inch inverted flare fittings. Confirm fit for your vehicle’s year, model and trim before ordering.
Baer positions the larger 1-1/8 inch bore for calipers or boosted systems that need more volume. The billet body is fully machined from 6061 T6 aluminum, and the visible hardware is black anodized, including the valve, the integrated mounting block and the caps. The knob-adjusted valve sets the front-to-rear balance.
Key features
- Machined 6061 T6 billet aluminum master cylinder with black body
- Black anodized proportioning valve and black mounting block
- Adjustable knob for front-to-rear brake balance
- Black anodized screw-on caps, knurled for easy filling
- Dual integral reservoir with removable seats
- Two outlets at 3/8-24 inch with a left-side exit
- Pre-bent 3/16 inch hardlines with banjo and inverted flare fittings
- Made in the USA
Larger bore considerations
A larger bore moves more fluid per pedal stroke, which can suit calipers that need more volume or systems with added boost. The change affects pedal effort and travel, so the caliper piston area, booster assist and pad compound should be considered together rather than one at a time.
The black anodized caps and valve are visible parts, so inspect them during routine service for corrosion and seal wear. Check the knob setting after any change to front or rear brake components, and keep the lines routed clear of moving parts and heat sources.
Hydraulic changes should be followed by a full bleed and a short test at low speed. Look for firm pedal feel after bleeding and recheck every fitting for seepage once the system has been driven.
- Match caliper piston area before choosing bore
- Consider booster assist for pedal effort
- Replace worn caliper seals when volume changes
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805205 |
| UPC | 90127856116 |
| Series | ReMaster |
| Kit contents | 1 master cylinder assembly, 1 proportioning valve |
| Bore size | 1-1/8 inch (1.125) |
| Master cylinder material | 6061 T6 billet aluminum |
| Body finish | Black anodized |
| Caps and lid finish | Black anodized |
| Proportioning valve finish | Black anodized |
| Mounting block color | Black |
| Proportioning valve type | Adjustable, knob |
| Master cylinder outlet ports | 2 ports, 3/8-24 inch |
| Port exit | Left side |
| Proportioning inlet and outlet | 3/8-24 inch |
| Fittings | Banjo (no brass seat) and 3/16 inch inverted flare tube nuts with brass seat |
| Reservoir | Dual, integral style |
| Mounting holes | 2 |
| Removable seats | Yes |
| Warning light connector | No |
| Country of origin | USA |
Vehicle fitment
A 2-bolt GM/Ford firewall bracket style is the mounting reference, and the bracket itself is not part of the kit. Check bore size, port side and firewall layout against your current system.
The larger bore suits applications Baer describes as needing more volume, so match it to your calipers and booster. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trial-fit the pre-bent lines to the valve and master cylinder before final tightening of the fittings. Bleeder screws and bleeder hoses are not included. Once the system is bled, check every fitting for leaks while the pedal is held under pressure.
What’s included
One master cylinder assembly with cap, one adjustable proportioning valve with integrated mounting block hardware, 3/16 inch hardlines and the included fittings.
Not included: firewall mounting bracket, mounting hardware, bleeder screws, bleeder hoses, brake booster, brake pressure switch, sensor, and gasket or seal.

















