Overview
The 6801272LP is a left port Remaster master cylinder with a 15/16 inch bore, made for 2-bolt GM and Ford firewalls. Its single billet body has a black anodized finish and works with long and short boosters as well as manual brake applications.
Both outlets exit the left side of the body, which decides where the brake lines must run. A dual integral reservoir sits inside the billet body, and six allen screws hold the billet top. Knurled screw-on caps make topping up fluid simple. The 3/8-24 outlet threads take inverted flare, banjo or straight fittings, and optional proportioning valves are available.
Key features
- Left side outlet ports on a 15/16 inch bore
- Single fully machined body in 6061 T6 billet aluminum
- Two 3/8-24 outlet ports for flexible fitting choice
- Machined, knurled caps for easy, spill-free filling
- Anodized body with laser-etched logo
- Dual integral reservoir sized at 7oz per reservoir
Booster and pedal feel
The master cylinder works with the brake booster to multiply pedal force, so the two parts are closely linked. A booster that is weak, leaking or has a faulty check valve will make the pedal feel hard even when the master cylinder is good. Testing the booster vacuum and checking the check valve is a sensible step before replacing the cylinder itself.
A worn or damaged bore can also make the pedal feel soft or cause it to sink. If the pedal drops slowly while held down, look for fluid bypassing the internal seals. When replacing the unit, flush the old fluid, bleed the lines fully and check that the pedal stops at a firm height before the vehicle is driven.
- Test the booster check valve before replacing the master cylinder.
- Look for fluid around the reservoir base or the outlet fittings.
- Bleed the brakes in the correct sequence after any line disconnection.
- Keep the reservoir cap sealed to limit moisture entering the fluid.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801272LP |
| UPC | 844165051206 |
| Series | ReMaster |
| Bore size | 15/16 inch (0.9375) |
| Flange type | 2-bolt GM/Ford firewall |
| Body material | 6061 T6 billet aluminum |
| Finish | Black anodized body, lid and caps |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port exit | Left side |
| Outlet port fittings | Banjo without brass seat, 3/16 inch inverted flare and tube nuts with brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.1 |
| Area | 0.69 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The 6801272LP has no vehicle fitment listed. Its application is 2-bolt Ford and GM firewall mounting with long or short boosters or manual brakes, but no years, models or chassis codes are given.
Measure the firewall pattern, booster type and push-rod length before installing, and confirm the year, model and trim of your vehicle before purchase.
Installation notes
- Spacer p/n 6260258 is called for with some long push-rod hydro-boost and vacuum boosters, to space the unit away from the push-rod.
- The brass seats and tube nuts serve the inverted flare outlet, and banjo outlets skip the seat.
- Lay out left side brake lines before mounting, since both outlets face that side.
What’s included
One 15/16 inch left port master cylinder assembly with integral dual reservoir, master cylinder cap, two brass seats and two tube nuts.
Not included: brake booster and gasket or seal, plus mounting hardware, bleeder screw, bleeder hoses, brake pressure switch, sensor, warning light connector, and spacer p/n 6260258.














