Overview
The Baer Brakes 6801273RP is a Remaster master cylinder with a 1 inch bore, right side outlet ports and a 2-bolt GM/Ford firewall flange. It is machined from 6061 T6 billet aluminum with a black anodized finish and suits Ford and GM applications with long or short boosters or manual brake setups.
The one-piece body is paired with a billet top held on by six allen screws. Two large knurled screw-on caps make filling the dual reservoir easier without spillage. The outlet ports take inverted flare fittings with the removable brass seats, or banjo fittings, and optional proportioning valves are also available from Baer.
Key features
- 1 inch bore with right side outlet ports
- Fully machined one-piece body in 6061 T6 billet aluminum
- 3/8-24 outlet port threads support inverted flare, banjo or straight fittings
- Removable brass seats for inverted flare connections
- Machined, knurled screw-on caps for filling without spillage
- Black anodized finish with laser-etched logos
- Integral dual reservoir in billet aluminum
Choosing and mounting a remaster
A master cylinder converts pedal force into hydraulic pressure for the front and rear circuits. On a remaster style unit, the bore size sets how much fluid moves per pedal stroke, so the bore should match the rest of the brake system and the caliper or wheel cylinder sizes. A larger bore gives more volume and a softer pedal feel, while a smaller bore gives a firmer pedal with less travel.
Mounting is where most problems start. Check the firewall pattern, the booster type and the push-rod length before the cylinder goes in. A push-rod that is too long or too short can keep the piston from returning fully, which causes drag or a spongy pedal. Brake lines should also be routed so they clear the chassis and steering parts once the unit is bolted down.
- Replace the brake fluid after a master cylinder swap and bleed the whole system.
- Inspect the old unit for fluid leaks at the flange and outlet fittings.
- Look for scoring in the bore if the pedal sinks slowly under steady pressure.
- Check the reservoir caps and seals for cracks that let air in.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801273RP |
| UPC | 844165051190 |
| Series | ReMaster |
| Bore size | 1 inch |
| Flange type | 2-bolt GM/Ford firewall |
| Body material | 6061 T6 billet aluminum |
| Finish | Black anodized body, lid and caps |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port exit | Right side |
| Outlet port fittings | Banjo without brass seat, 3/16 inch inverted flare and tube nuts with brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.1 |
| Area | 0.78 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The 6801273RP mounts to a 2-bolt Ford or GM firewall and works with long or short boosters or manual brake setups.
Measure your firewall, booster type and push-rod length before installing, and make sure the fit matches your vehicle’s year, model and trim before you buy.
Installation notes
- Some long push-rod hydro-boost and vacuum boosters need Baer spacer p/n 6260258 to keep the Remaster clear of the booster push-rod.
- Inverted flare outlets use the two brass seats and tube nuts in the box; banjo outlets do not use the brass seat.
What’s included
One master cylinder assembly with integral dual reservoir, master cylinder cap, two brass seats and two tube nuts. Fittings and reservoir are included.
Not included: brake booster, gasket or seal, mounting hardware, bleeder screw, bleeder hoses, brake pressure switch, sensor, connector for warning light, and the spacer p/n 6260258.














