Overview
The Baer Brakes 6801304LP is a Remaster master cylinder with a 1.125-inch (1-1/8 inch) bore, a 4-bolt Mopar firewall mounting flange, left side outlet ports and a black anodized finish. It is machined from a single piece of 6061 T6 billet aluminum and is aimed at the many early Mopar applications that use a 4-bolt mount.
The body is compact, and the billet top is held on with 6 allen screws. Two large, knurled screw-on caps make filling easier and help avoid spills. The outlets accept inverted flare fittings, using the included removable brass seats, or banjo style fittings. The cylinder is compatible with most long and short boosters, with an included bullet, or with manual brake applications. Optional proportioning valves are available.
Key features
- Fully machined 6061 T6 billet aluminum construction
- 4-bolt Mopar firewall mounting bracket
- Left side outlet ports
- Outlet ports accept inverted flare, banjo or straight fittings
- Knurled screw-on caps for filling without spillage
- Dual integral reservoirs, 7oz per reservoir
- Anodized finish with laser-etched logos
Choosing a matching setup
A master cylinder turns pedal force into hydraulic pressure for the front and rear brake circuits. Its bore size, the volume of fluid it moves and the way its outlets connect to the lines all affect how the pedal feels. When a master cylinder is replaced, the brake lines, booster pushrod length and pedal travel should be checked as a set, since a different bore changes how much pressure reaches each wheel.
Replacement is often combined with new brake lines, fittings and fluid, and many builds also add a proportioning valve or a new pedal assembly. Keep the fitting type consistent across the whole system. After installation, bleed the circuits in the correct order and check for leaks at every fitting before driving.
- Look for seepage around the cap and lid seals
- Watch for a soft or sinking pedal over several presses
- Check the pushrod adjustment before final installation
- Replace worn hoses and fittings at the same time
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801304LP |
| UPC | 844165052227 |
| Series | ReMaster |
| Bore size | 1.125 inch (1-1/8 inch) |
| Flange type | 4 Bolt Mopar |
| Body material | 6061 T6 billet aluminum |
| Finish | Black anodized body, caps and lid |
| Port exit | Left side |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port fittings | Banjo w/o brass seat, 3/16 inch inverted flare and tube nuts w/ brass seat |
| Removable seats | Yes |
| Reservoir type | Dual, integral |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.3 |
| Area | 0.97 |
| Volume ratio | 0.0840277777777778 |
| Country of origin | USA |
Vehicle fitment
It is aimed at many early Mopar applications that use a 4-bolt firewall flange with a booster or manual brake setup. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Two brass seats and two tube nuts are supplied for the inverted flare outlets, so banjo fittings need no seats while inverted flare fittings use the removable seats. Bleeder screws, bleeder hoses and mounting hardware are not supplied, so have them ready before starting. Optional proportioning valves are available if your application calls for one.
What’s included
One Remaster master cylinder assembly with a master cylinder cap, two brass seats and two tube nuts. Fittings are included.
Not included: bleeder screws, bleeder hoses, brake booster, brake pressure switch(es), gasket or seal, mounting hardware and sensor.














