Overview
The Baer Brakes 6805245 is a black ReMaster master cylinder assembly and proportioning valve kit with pre-bent hardlines. It is built around a black billet master cylinder with a 7/8 inch bore, left-side ports and a 2-bolt mount, and it is sold as a kit.
The black master cylinder, matching valve and hardlines come together as one package, so the hydraulic front end is a single compact unit. The valve is knob-adjustable, giving control over brake balance for manual or power setups that need finer tuning. The 2-bolt mount suits GM and Ford firewall applications.
Key features
- Fully machined 6061 T6 billet aluminum construction
- Black anodized proportioning valve and black caps and lid
- Machined, knurled screw-on caps for easy filling
- Knob-adjustable proportioning valve with integrated mounting block
- Dual integral reservoir with removable seats
- Left-side master cylinder and valve ports
- Pre-bent hardlines with inverted flare and banjo fittings
- Made in the USA
Hardlines and fittings
Pre-bent hardlines reduce the need for bending on site, but they still have to match the mounting location and clear nearby parts. Inverted flare and banjo fittings seal in different ways, so each fitting should only be connected to the port type it was made for. Check clearance to suspension, steering, exhaust and heat sources, and support lines with clamps so they do not vibrate against the frame.
Flare fittings should be snugged with a flare wrench and not forced, since overtightening can crack a flare. Banjo fittings need new crush washers on each side when reconnected. After any hydraulic work, check every joint for seepage, bleed the system in the correct sequence, and test pedal firmness before driving. Keep fresh brake fluid on hand and avoid mixing fluid types.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805245 |
| UPC | 810215393060 |
| Series | ReMaster |
| Kit contents | 1 master cylinder assembly, 1 proportioning valve |
| Bore size | 0.875 in (7/8 inch) |
| Master cylinder material | 6061 T6 billet aluminum |
| Master cylinder outlet port quantity | 2 |
| Master cylinder port exit | Left side |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Removable seats | Yes |
| Master cylinder cap included | Yes |
| Body finish | Black anodized |
| Caps and lid finish | Black anodized |
| Proportioning valve type | Adjustable, knob |
| Proportioning valve material | Aluminum |
| Proportioning valve finish | Black anodized |
| Proportioning valve inlet port quantity | 2 |
| Proportioning valve port exit | Left side |
| Proportioning mounting block | Integrated, aluminum, 2 holes, hardware included |
| Mounting hole quantity | 2 |
| Mounting bracket included | No |
| Mounting hardware included | No |
| Brake booster included | No |
| Brake pressure switch included | No |
| Fittings included | Yes |
| Gasket or seal included | No |
| Sensor included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The kit has a 2-bolt firewall mount suited to GM and Ford applications. Check the bore, mount location and line layout on your own vehicle before use. Confirm fit for your vehicle’s year, model and trim before ordering.
Check the bore, mount location and line layout on your own vehicle before use. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Neither the mounting bracket nor the mounting hardware is included, so a 2-bolt firewall bracket and fasteners must be obtained separately. Check the fitting and hardline routing before tightening, because the outlet fittings include both inverted flare and banjo styles. Have a qualified technician bleed the system and test the pedal before the vehicle is driven.
What’s included
One ReMaster master cylinder assembly with reservoir and cap, one adjustable proportioning valve, and pre-bent hardlines with fittings.
Not included: Mounting bracket, mounting hardware, brake booster, brake pressure switch, and gasket or seal.

















