Overview
The Baer Brakes 6801302LP is a polished Remaster master cylinder with a 1 inch bore, left side outlet ports and a 4-bolt Mopar firewall flange for early Mopar setups. It is machined as one piece from 6061 T6 billet aluminum and suits a system that uses either a power booster or a manual brake pedal.
The billet top is fastened with 6 allen screws and carries two large knurled caps for easy filling. Outlet ports use a 3/8-24 thread and accept inverted flare fittings with removable brass seats, or banjo style and straight fittings. It is compatible with most long and short booster or manual applications, and optional proportioning valves are also available.
Key features
- Fully machined, one-piece 6061 T6 billet aluminum body
- Left side ports with 3/8-24 outlet threads
- Removable seats for inverted flare, plus banjo and straight fitting options
- Knurled caps with a screw-on design for spill-free filling
- Polished body, caps and lid
- 4-bolt Mopar firewall mounting bracket
Planning the line layout
Left-side ports often mean the brake lines run across a different part of the engine bay than they would with right-side ports. Lay out the fittings, check the tube lengths and identify any spot where a line could rub against a bracket, a hose or the exhaust before you tighten anything. A simple template made from the old lines can save a second trip.
Think about the fitting type first. The inverted flare outlet uses the removable brass seats, while the banjo option has its own hardware, so mixing types on one line can leak. Once the layout is set, tighten the fittings in steps and recheck them after the system has been bled and the pedal has been pressed several times.
- Mark the line routes before cutting
- Keep one fitting style per line
- Check for rub points near brackets
- Recheck fittings after the first drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801302LP |
| UPC | 844165052128 |
| Series | ReMaster |
| Bore size | 1 inch |
| Body material | 6061 T6 billet aluminum |
| Body finish | Polished |
| Cap and lid finish | Polished |
| Flange type | 4 bolt Mopar |
| Master cylinder port exit | Left side |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Outlet port fittings | Banjo without brass seat, 3/16 inch inverted flare and tube nuts with brass seat |
| Removable seats | Yes |
| Reservoir | Integral, dual, 6061 T6 billet aluminum |
| Reservoir size | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Stroke | 1.1 |
| Master cylinder cap | Included |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
Its design targets early Mopar cars with a 4-bolt flange. Check the flange and bore against your vehicle’s original setup, and confirm fit against your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Left side ports change the hose routing compared with right-port versions, so plan the line layout before mounting. The two brass seats and two tube nuts supplied suit the inverted flare outlet, while the banjo option uses its own fittings.
What’s included
One left-port Remaster master cylinder with its cap, two brass seats, two tube nuts and an integral dual reservoir.
Not supplied: bleeder screws and hoses, the booster, the pressure switch, any sensor or gasket, and the mounting hardware.














