Overview
The Baer Brakes 6805146 is a 10-pound pressure residual valve made from billet aluminum, with a 3/8-24 IF female fitting and a black anodized finish. A pressure residual valve maintains a small amount of line pressure in the brake lines in certain situations. It is a general fit residual pressure valve, so it is not tied to one specific vehicle.
Baer rates this 10-pound valve for any drum brake circuit, regardless of where the master cylinder is mounted. Disc brake systems use a 2lb valve when the master cylinder is mounted below or level with the calipers, which prevents fluid drain back that can cause excessive pedal travel. A four wheel disc brake vehicle would use two valves, one in the front circuit and one in the rear circuit.
Key features
- 10-pound rating for drum brake circuits, as specified by Baer
- Billet aluminum body with a black anodized finish
- 3/8-24 IF female inlet fitting
- Maintains a small amount of line pressure in certain brake situations
- Billet aluminum frame mounts are available separately
Drum brake circuit basics
A drum brake circuit sends fluid to wheel cylinders that push shoes against the inside of the drum. Residual pressure keeps the cylinder cups seated so air is less likely to enter during repeated pedal cycles. The valve is a small part of that circuit, but a mismatch with the rest of the layout can show up as a soft or uneven pedal.
Drum and disc systems should not be mixed up when a valve is replaced. Before ordering, identify which wheels use drums and which use discs, and note where the master cylinder sits relative to the calipers. Those two facts decide which rating belongs in each circuit.
- Confirm which wheels have drum brakes
- Note the master cylinder position before ordering
- Check wheel cylinder boots for tears
- Bleed the circuit after any valve change
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805146 |
| UPC | 844165052371 |
| Pressure rating | 10 pounds |
| Material | Billet aluminum |
| Finish | Black anodized |
| Inlet fitting | 3/8-24 IF female |
| Mounts included | No |
| Grade | Premium |
| Box count | 1 |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
Fitment depends on brake circuit type rather than a particular year, make, model or chassis code. Match the rating to your drum or disc layout before choosing a valve.
The valve is not vehicle-specific. Confirm whether your brakes are drum or disc and where the master cylinder is mounted before selecting a valve.
Installation notes
The valve has a 3/8-24 IF female fitting, so confirm the thread matches your brake line fittings before installation. Billet aluminum frame mounts are available separately and are not included, so plan how the valve will be secured. Brake work affects stopping performance, so have the installation checked by a qualified technician.
What’s included
The package includes one residual valve.
Not included: Billet aluminum frame mounts, which are available separately.












