Overview
The Baer Brakes Remaster 6801238RP is a right-port master cylinder with a 1 inch bore, made for a 2-bolt GM and Ford firewall mount. Its body is machined from 6061 T6 billet aluminum, and Baer says it fits most long and short boosters or manual brake setups.
Right-side outlet ports suit plumbing routed toward the right of the cylinder. Large knurled caps make filling easier, and the outlet ports accept inverted flare with removable brass seats, or banjo and straight fittings. Baer notes that some long push-rod hydro-boost and vacuum boosters may require spacer part 6260258 to keep the cylinder away from the booster push-rod.
Key features
- Fully machined 6061 T6 billet aluminum body
- Right side outlet ports
- Outlet ports threaded 3/8-24 with inverted flare, banjo and straight fitting options
- Machined, knurled screw-on caps that fill without spilling
- Gray anodized body with black caps and lid
- Dual integral reservoirs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801238RP |
| UPC | 844165046219 |
| Series | ReMaster |
| Bore size | 1 inch (1.000 inch) |
| Body material | 6061 T6 billet aluminum |
| Body finish | Anodized gray |
| Cap and lid | Black, anodized |
| Flange type | 2-bolt GM/Ford |
| Outlet port size | 3/8-24 inch |
| Outlet port count | 2 |
| Port exit | Right side |
| Outlet fittings | Banjo with no brass seat; 3/16 inch inverted flare with brass seat and tube nuts |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7 oz per reservoir; fill to 75 percent or 5.25 oz per reservoir |
| Stroke | 1.1 |
| Area | 0.78 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
Baer lists no vehicles for the 6801238RP in the fitment data here, so compatibility is unconfirmed. Match the 2-bolt GM/Ford flange, the 1 inch bore and the booster pushrod length against your application, and check the manufacturer’s specifications.
Bore and port side are the two dimensions to match before choosing this cylinder.
Installation notes
Measure pushrod clearance on your booster before installing, since a spacer such as part 6260258 may be needed. Decide between inverted flare seats and banjo fittings before routing the outlet lines. Brake work should be handled by a qualified technician.
What’s included
The kit holds one master cylinder assembly, two brass seats, two tube nuts, a master cylinder cap and an integral dual reservoir.
Not included: the booster, firewall hardware, bleeder screws and hoses, gaskets or seals, and any brake pressure switch.














